Question: Best Practice for NEFilterRule and NENetworkRule Initializers with Deprecated NEHostEndpoint? Hi all, I'm looking for guidance on the right way to construct an NEFilterRule that takes a NENetworkRule parameter. Reading the latest documentation, it looks like: All initializers for NENetworkRule that accept an NEHostEndpoint are now deprecated, including initWithDestinationHost:protocol: and those using the various *Network:prefix: forms. NEHostEndpoint itself is also deprecated; Apple recommends using the nw_endpoint_t type from the Network framework instead. However, NEFilterRule still requires a NENetworkRule for its initializer (docs). With all NENetworkRule initializers that take NEHostEndpoint deprecated, it’s unclear what the recommended way is to create a NENetworkRule (and thus an NEFilterRule) that matches host/domain or network traffic. What’s the proper way to construct these objects now—should we create the endpoints using nw_endpoint_t and use new/undocumented initializers, or is there an updated approach that’s considered best practice? Helpful doc links for reference: NEFilterRule docs NENetworkRule docs NWHostEndpoint (now deprecated)

Hello, im currently developing proxy app with XrayCore trying to bypass APNs when tunnel us up and i found .excludeAPNs property in NETunnelProviderProtocol that works only when includeAllNetworks property is also TRUE. I wonder if there is a possible way to make APNs bypass tunnel in split tunnelling mode? because we use excludedRoutes and full tunnel is not an option

I have 3 phones iPhone 14 iOS 18.3 iPhone Xr iOS 18.5 iPhone Xr iOS 18.4.1 My app has a network extension, and I've noticed each phone having their connectivity interupted by calls on the push provider, calling stop with the noNetworkAvailable reason. The point of confusion is that each phone seems to get it's interuption at different times. For example one will get an interuption at 1:00, while the others is fine, while at 3:00 another will get an interuption, while the others are fine. This is confusing since a "no network available" seems to imply a problem with the router, or access point, but if that were the case, one would believe it should affect all the phones on the wifi. I don't see less interuptions on the iPhone14 vs the iPhone Xr. Do you believe the iOS version is affecting the performance? Could you please give me some insight, as to what could be going on inside these phones? P.S. I also see an error pop up when using NWConnection, this is inside the App. The state update handler will sometimes return the state, waiting(POSIX(.ENETDOWN)) Is there any relation to what's going on in the extension?

fetchCurrent(completionHandler:) https://developer.apple.com/documentation/networkextension/nehotspotnetwork/fetchcurrent(completionhandler:) The same code works fine in Xcode 16, but when I run the same project in Xcode 26, it doesn't work

We have a content filter system extension as part of our macOS app. The filter normally works correctly, activation and deactivation works as expected but occasionally we see an issue when the content filter is activated. When this issues occurs, the filter activation appears to behave correctly, no errors are reported. Using "systemextensionsctl list" we see the filter is labelled as "[activated enabled]". However, the installed content filter executable does not run. We have seen this issue on macOS 15.3 and later and on the beta macOS 26.1 RC. It happens only occasionally but when it does there is no indication as to why the executable is not running. There are no crash logs or errors in launchd logs. Both rebooting and deactivating/activating the filter do not resolve the issue. The only fix appears to be completely uninstalling the app (including content filter) and reinstalling. I have raised a FB ticket, FB20866080. Does anyone have any idea what could cause this?

My app attempts to upload events and logging data when the user backgrounds the app (i.e., when applicationDidEnterBackground is triggered) by creating an uploadTask using a URLSession with a URLSessionConfiguration.background. When uploading these events after being backgrounded, we call beginBackgroundTask on UIApplication, which gives us about 25-30 seconds before the expirationHandler gets triggered. I am noticing, however, that the expirationHandler is frequently called and no upload attempts have even started. This might be reasonable if, for example, I had other uploads in progress initiated prior to backgrounding, but this is not the case. Could someone confirm that, when initiating an uploadTask while the app is backgrounded using a backgroundSession, there's really no way to predict when that upload is going to begin? My observation is that about 10-20% of the time it does not begin within 20 seconds of backgrounding, and I have many events coming from clients in the field showing as much.

Our app receives real-time GPS and aircraft data from devices via UDP broadcast and/or multicast on a WiFi network created by the device. We have identified that the iPhone or iPad will just stop receiving UDP broadcast/multicast data for an interval of time. In general, it appears after roughly every 128KB of data is received. In the attached screenshot from Xcode instruments, you can see the data reception alternating on/off. We have verified with Wireshark that the data is still flowing during that entire time period. And by tracking bytes received the app ultimately receives about 55% of the bytes, which tracks with the Network graph. We have used different approaches to the network code, including GCDAsyncUdpSocket, BSD Sockets, and the Network framework. We've tried it on background threads and the main thread. Tested it on iPads and iPhones. All produce the same result. The data is just never reaching the app code. Any insight on what may be temporarily disabling data reception?

I am trying to intercept localhost connections within NETransparentProxyProvider system extension. As per NENetworkRule documentation If the address is a wildcard address (0.0.0.0 or ::) then the rule will match all destinations except for loopback (127.0.0.1 or ::1). To match loopback traffic set the address to the loopback address. I tried to add NWHostEndpoint *localhostv4 = [NWHostEndpoint endpointWithHostname:@"127.0.0.1" port:@""]; NENetworkRule *localhostv4Rule = [[NENetworkRule alloc] initWithDestinationNetwork:localhostv4 prefix:32 protocol:NENetworkRuleProtocolAny]; in the include network rules. I tried several variations of this rule like port 0, prefix 0 and some others. But the provider disregards the rule and the never receives any traffic going to localhost on any port. Is there any other configuration required to receive localhost traffic in NETransparentProxyProvider?

I use eapolcfg in Apple's open source eap8021x repository to connect to the enterprise network. 1.https://github.com/gfleury/eap8021x-debug https://opensource.apple.com/source/eap8021x/eap8021x-304.100.1/ Our enterprise network authentication is PEAP. So far, I have created a profile using the following commands and have done the access. ./eapolcfg createProfile --authType PEAP --SSID myssid --securityType WPA2 --userDefinedName MyProfile ./eapolcfg setPasswordItem --password mypassword --name myname --SSID myssid ./eapolcfg startAuthentication --interface en0 --SSID myssid After I performed this series of operations, I passed BOOL success = [self.interface associateToEnterpriseNetwork:network identity:nil username:username password:password error:&error]; Connection will pop up the following pop-up window, sometimes associateToEnterpriseNetwork will fail. I don't know what went wrong, is it that I missed some steps through the eapolcfg [tool?] This function also reports the following error：Error Domain=com.apple.coreWLAN.EAPOL.error Code=1 "(null)" Please answer my questions. Thank you very much

Hi, when I perform an overlay installation via a PKG on macOS for an application containing the NEFilterDataProvider functionality, there is a chance that the entire system network becomes unreachable. Disabling the corresponding Content Filter in "System Settings > Network > Filters" immediately restores network connectivity. This issue does not occur every time, with a frequency of approximately 1 in 20 installation attempts.  The following details may help identify the problem: The Filter.app containing the NEFilterDataProvider resides within the main app's Resources directory, e.g., /Applications/Main.app/Contents/Resources/Filter.app Main.app is installed via a PKG; the issue typically occurs during an overlay installation of Main.app. The NEFilterDataProvider operates as a System Extension. The func handleNewFlow(_ flow: NEFilterFlow) -> NEFilterNewFlowVerdict {} returns .allow. Wireshark packet captures show TCP packets but no UDP packets; TCP handshakes cannot complete. Disabling the corresponding content filter in "System Settings > Network > Filters" restores the network; re-enabling it breaks connectivity again. After waiting for a period, approximately 30-60 minutes, network connectivity can recover automatically. What causes this and how can it be fixed? Any workarounds?

Hi everyone, I'm developing an enterprise iOS application and need to access the WiFi connection channel. I understand that Apple's privacy and security policies restrict direct access to certain network details, including the WiFi connection channel. After some research, I found that this data might be accessible via the private API MobileWiFi.framework. However, when I tried to use this framework, I encountered the following error: Missing com.apple.wifi.manager-access entitlement I reached out to Apple regarding this entitlement, but they were not familiar with it, suggesting it might be deprecated. Here are my questions: Is there an official or supported way to access the WiFi connection channel in an enterprise iOS app? If not, is there any workaround or additional steps required to use the MobileWiFi.framework without encountering the entitlement error? Are there any specific entitlements or provisioning profile configurations that I need to be aware of to resolve this issue? Any guidance or suggestions would be greatly appreciated. Thank you!

Hello, We've been working on an app that uses the new NEUrlFilter API and we've got a question. Currently, the system is designed with the assumption that a single app == usecase == single remote database. But what if we would like to give the user the ability to use different blocklists? For example, the user may want to: Block scam domains Block tracking domains Block adult domains Or any composition of these 3 What should we do to give the user this option? It seems that we could differentiate different databases by using different PIR service hostnames, but that would also mean that we'll have to send several requests for the same usecase but with different PIR service hostnames (and they'll all share the same app bundle ID). Will these requests be accepted then? If not, is there an alternative? PS: By sending a request I mean submitting this form

We are developing an iOS application with a key feature designed to enhance user safety: real-time assessment of Wi-Fi network security. The "Safe Wi-Fi" feature aims to inform users about the security level of the Wi-Fi network they are currently connected to. Our goal is to provide this information seamlessly and continuously, even when the user isn't actively using the app. Currently, we've implemented this feature using a NWPathMonitor. The limitation of NWPathMonitor is that it doesn't function when the app is in a kill state. We are looking for guidance on how to achieve persistent Wi-Fi security monitoring in the background or when the app is killed. Is there any API (Public, Special API, etc) or a recommended approach that allows for real-time Wi-Fi connection monitoring (including connection changes and network details) even when the app is not actively running or is in a kill state. Thank you in advance for your help.

Our app supports live streaming (RTSP, RTMP, WebRTC) functionality. After updating to the 18.5 Developer Beta version, we’ve encountered an issue where streaming over LTE is not working for customers using SKT (SK Telecom) as their carrier. Upon investigation, it seems that a similar issue might be occurring with a streaming service app called "SOOP." I would appreciate it if you could share any information regarding this bug. Thank you.

I'm using Network framework for communication between devices. The first time I instantiate an NWBrowser, it will prompt the user with a popup that says: Allow <app name> to find devices on local networks? The problem is, once I upgraded from Xcode 15.4 to Xcode 16.4, the popup doesn't appear; it says in the debug window: nw_browser_fail_on_dns_error_locked [B1] nw_browser_dns_service_browse_callback failed: PolicyDenied(18,446,744,073,709,486,046) I do have the info.plist keys Privacy-Local Network Usage Description (NSLocalNetworkUsageDescription) and Bonjour Services (NSBonjourServices) so it's not that. Also, It still works on a real device. I think something changed with Xcode 16 that tightened the security on a simulator, or maybe disabled Network framework entirely. It's not the firewall on my computer because that is turned off. I'm using an M1 MacBook Pro.

Hello everyone, I'm trying to figure out how to transmit a UIImage (png or tiff) securely to an application running in my desktop browser (Mac or PC). The desktop application and iOS app would potentially be running on the same local network (iOS hotspot or something) or have no internet connection at all. I'm trying to securely send over an image that the running desktop app could ingest. I was thinking something like a local server securely accepting image data from an iPhone. Any suggestions ideas or where to look for more info would be greatly appreciated! Thank you for your help.

Hello, we are developing hardware that needs to connect to an iPhone via Wi-Fi to send requests to a server. On Android, we have managed to create a programmatic local hotspot within the app to facilitate connection and improve the user experience. On iOS, however, Personal Hotspot must be manually enabled from the system settings, and the user must manually enter the SSID and password, which significantly degrades the UX. My questions are: Is there a workaround, unofficial method, or private API to generate a local hotspot from an app on iOS, similar to what can be done on Android? Is there an alternative within the MFi program or through specific frameworks to facilitate a quick and automatic connection between the hardware and the iPhone without relying on the manual Personal Hotspot? Are there any best practices for improving the local Wi-Fi connection experience between an accessory and an iPhone in the absence of hotspot controls? I would appreciate any guidance, experience, or resources that would help me better understand the feasible options in iOS for scenarios where fast and direct communication between hardware and mobile devices via Wi-Fi is required.

1) Blocked page UX When a URL is blocked, the browser typically shows a generic error like “"Safari cannot open the page because it couldn’t load any data,” with no indication that the page was blocked by a policy. Is there any plan to add an API that allows developers to present a custom “blocked” page or remediation action, similar to NEFilterControlProvider’s remediationMap? Even a minimal hook (custom HTML, deep link, or support URL) would make the experience clearer for users. 2) Cross‑app link‑opening behavior With a block rule in place, direct navigation in Safari is blocked as expected. However, tapping the same URL in a messaging app (e.g., WhatsApp) opens Safari - and the page loads, not blocked. Repro steps: Configure a URL Filter extension that blocks https://example.com. Case A: Open a browser and type the URL in the address bar → blocked (expected). Case B: Tap the same URL in WhatsApp (or another messenger) → a browser opens and the page loads (unexpected). iOS version - 26.0

I’m developing a iOS VPN app, and I need to execute a task in the main app even when it’s in the background or killed state. I know the Network Extension continues running during those times. Is there a way for the extension to immediately notify the app or trigger a task on the app side?

Hi guys, I try to create a content filter app by using network extension api. When it comes to a https/tls remote endpoint, the remoteEndpoint.hostname will always be "" instead of the actual hostname. How can I extract the actual hostname? private func filterTraffic(flow: NEFilterSocketFlow) -> NEFilterNewFlowVerdict { // Default action from settings will be used if no rules match logger.error("filter traffic...") guard let remoteEndpoint = flow.remoteEndpoint as? NWHostEndpoint else { logger.error("not a NWHostEndpoint)") return .allow() } logger.error("host name: \(remoteEndpoint.hostname)") if remoteEndpoint.hostname.hasSuffix("google.com"){ logger.error("google.com") return .drop() } return .allow() } code-block