My application is in flightTest mode. I received my first two crash reports in XCODE /Organizer. The context is well described, and I was able to isolate the locations where very serious errors occurred. My application is connected. I'm missing one piece of data in this crash report: the time of the crash. This will help me see what (in my case) static data was being read on the data server at that time. This will help me investigate. Is it possible to obtain this information?

Hi, I'm unable to install provisioning profile on my iPad and I know the xcode component iOS/iPadOs version and iPadOS version should be same or below the latest compared to xcode components. Now the issue is xcode component version is iOS 18.4 (22E235) SDK + iOS 18.4 (22E238) Simulator (Installed) and iPadOS version is iOS 18.4.1(22E252) could this be cause of issue ? If yes then when will apple release components for 18.4.1? Because iOS 18.4.1 release at least 3-4 weeks before this post.

My widget uses the @Environment(.isActivityFullscreen) variable. When running on ios 17, it will crash and report an error: dyld[55031]: Symbol not found: _$s7SwiftUI17EnvironmentValuesV9WidgetKitE20isActivityFullscreenSbvg Expected in: /Library/Developer/CoreSimulator/Volumes/iOS_21E213/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 17.4.simruntime/Contents/Resources/RuntimeRoot/System/Library/Frameworks/WidgetKit.framework/WidgetKit

We are experiencing networking issues in our iOS application when it is built with Xcode 16 or later. Our app includes a video conferencing feature that works reliably when built with Xcode 15 or earlier — we can sustain hour-long video sessions without interruption. However, when the app is built using Xcode 16 or higher, network connections drop after 2–3 minutes during a session. This triggers an auto-reconnect, which succeeds, but the connection drops again after another 2–3 minutes. This loop continues indefinitely. Key Details: The issue only occurs in TestFlight builds. When running the app via Xcode debugger, the issue does not occur. The issue is consistently reproducible in TestFlight builds created with Xcode 16 or later. TestFlight builds created with Xcode 15 do not exhibit this issue. All the videoconferencing runs on C and C++ code What We’ve Tried: Reviewed Xcode 16+ release notes but found no relevant changes or deprecations. Verified app configuration and entitlements. Confirmed that no app-side changes occurred between the working and broken builds. Request: We’re seeking guidance on what changes in Xcode 16+ could be affecting networking behavior in release/TestFlight builds. Any insight into relevant build settings, compiler changes, or runtime behavior differences would be greatly appreciated. Thank you in advance for your assistance.

My app uses the top navigation panel which contains the back button, a title, and prompt. On an actual device, the navigation area is light and shows all three items. On the simulator, the navigation area is black and only the back button is shown. I need this to be correct for app store screen shots.

I have a couple apps in one git repository. I'd like to have a Swift package in that repo as well, shared by apps. In other words, I don't want a separate repo for the Swift package. I followed the instructions here: https://developer.apple.com/documentation/xcode/organizing-your-code-with-local-packages It seems to work. I can write code like this in my app: import MyLocalPackage func foo() { myLocalPackageFunc() } I notice that the package is not listed under Project > MyApp > Package Dependencies. I don't really care, as long as I can reuse code between apps. But when I try to add this package code to a 2nd app, I'm at a loss. I tried "Add Package Dependencies" and "Add Local", but that creates a different looking setup than the 1st app. The code is browsable in the project navigator. And when I try to build it says "Missing package product 'MyLocalPackage'. The documentation linked above, which I used for the 1st app, does a "New > Package". I don't want a new package. How can I connect the existing one?

我想在我的 Mac OS 项目 （Swift UI） 中添加一个 Package dependency Package，但我只能添加一个 Package Collection，我不能只添加一个单独的包依赖包，我想添加 mysql kit 以使我的项目链接到 Mysql 数据库

I have the this issue when I run the app on iOS Simulator after updating to app to make it compatible with Xcode-16 and iOS-18. after upgradation to Xcode-16 its giving the above error "Executable path is a directory" .This app work fine on Xcode-15 . Note - The issue with iOS Simulator only. From XCode-16 build is created successfully and installed in iOS device.

I have enabled Code Review with the button and then String Catalog turned up to code view anyways i can't get it back to original view. Disable Code Review button doesn't do anything. Any idea?

Hi, I'm encountering an issue with the .symbols files when building iOS and generating ipa file with Xcode 15.4 vs Xcode 16.1. I built my iOS project and generated an ipa file using Xcode 15.4. After I unzipped the ipa, there are around 10 .symbols files in the Symbols folder. One of them is about 20MB and others are under 1MB. However, when I built and generated the ipa with the newer Xcode 16.1, after unzip, there are no .symbols files in the Symbols folder. Could anyone explain why this happened? Is there a new setting or behavior in Xcode 16.1 that affects the generation of .symbols files? I think the .symbols files are needed for analyzing crash reports and symbolication, and I’m unsure why they aren’t present in the build generated with Xcode 16.1. Any help would be greatly appreciated! Thanks in advance.

Hello , am facing issue in submitting my app to store I have submitted my case to apple developer team my case ids "101969263018","101975805043". they told me to submit the report from feedback assistance my case id : FB12141270. but still I don't get any replay form feedback assistance. after that I submitted my case to DTS engineer case id : 2394373. got email to submit some file which I have submitted after that still I don't get any reply from DTS team. please help me to short out this issue. last one month am trying to short out this issue with apple developer team. still I don't get solution.

Hi everyone, I'm trying to add standard, non-unique database indexes to my Core Data entities for performance optimization (e.g., indexing Date or String attributes used in predicates and sort descriptors). I'm using Xcode 16.2 on macOS Sequoia 15.1. My problem is that I cannot find the expected UI element in the Core Data model editor (.xcdatamodeld) to configure these database indexes. What I Understand / Expect: I know the old "Indexed" checkbox on the Attribute Inspector is deprecated/gone. My understanding from recent documentation and tutorials is that database indexing (separate from Spotlight indexing) should be configured in the Entity Inspector (when the Entity itself is selected), within a section titled "Indexes" (usually located below "Constraints"). This "Indexes" section should allow adding individual or compound indexes that translate to SQL CREATE INDEX commands, distinct from uniqueness constraints. What I'm Experiencing: When I select an Entity in the model editor, the "Indexes" section is completely missing from the Data Model Inspector pane on the right. I see sections for Name, Class, Constraints, Spotlight, User Info, Versioning, etc., but no "Indexes" section appears between Constraints and Spotlight (or anywhere else). Troubleshooting Steps Taken: Verified Selection: I have confirmed I am selecting the Entity itself in the left-hand list, not an individual Attribute. Ruled out Spotlight Indexing: I understand the difference between database indexing (for internal query performance) and the "Index in Spotlight" checkbox/Core Spotlight framework (for system search). I specifically need the former. Basic Xcode Troubleshooting: I have tried restarting Xcode, cleaning the build folder (Shift+Command+K), and deleting the project's Derived Data. The "Indexes" section remains missing. Checked File Placement/Target Membership: Confirmed the .xcdatamodeld file is correctly included in the target. Its location in the project navigator doesn't seem relevant. Checked Model Versioning: Ensured the correct model version is set as "Current" in the File Inspector. Ruled out Other Features: Confirmed that Fetch Requests, Fetched Properties, and User Info keys are not the mechanisms for defining database indexes. Confirmed Not Project-Specific: I created a brand new, template-generated iOS App project with "Use Core Data" checked. In this new project, when selecting the default "Item" entity, the "Indexes" section is also missing from the Entity Inspector. This strongly suggests the issue is with my Xcode environment/version itself, not my specific project's setup. Considered Programmatic/Manual: I understand Core Data expects schema definitions (including indexes) declaratively in the model file. While manual XML editing of the contents file works (adding ... within the tag), this is not the desired or intended workflow via the standard tools. My Questions: What is the correct, current procedure for defining non-unique Core Data database indexes using the Xcode UI in Xcode 16.2? Has the location or method for configuring database indexes changed in this version of Xcode? If so, where is it now? Is the absence of the "Indexes" section in the Entity Inspector a known issue or intentional change for this Xcode version? If the standard UI method is unavailable, what is the officially recommended approach (other than manual XML editing)? I've reviewed the documentation ("Configuring Entities", "Configuring Attributes") and while screenshots show the inspectors, they don't definitively show the "Indexes" section within the Entity Inspector, sometimes focusing on attributes or potentially being cropped. Any clarification or guidance would be greatly appreciated!

Hello! When trying to use MLTensor, I am getting the error that it is not found in scope even though I am using Xcode 15.1 (it says fully up to date) and set my deployment target to iOS 17.2. Is there something else I need to be doing in order to use MLTensor? Thanks! Michael

I am passing UUID Key from View1 to View2. In View2, I need to Fetch entries using TabKey. userId is global variable working fine. Giving error TabKey. Please help. how to get rid of this error. If I keep this logic inside init method, Getting new error saying that "Cannot convert value of type 'FetchedResults' to expected argument type 'Binding' Here is the Code. @FetchRequest( sortDescriptors: [NSSortDescriptor(keyPath: \Table2.date, ascending: false)], predicate: { guard let currentUserId = AppSession.shared.currentUserId else { return NSPredicate(value: false) // Or handle the nil case as needed } return NSPredicate(format: "userId == %@ AND itemKey == %@", currentUserId as CVarArg, TabKey as CVarArg ) }(), animation: .default ) private var itab: FetchedResults

So I will summary an issue one of our clients has asked us on GitHub: https://github.com/pendo-io/pendo-mobile-sdk/issues/233 Project that is a custom framework that uses different SPM packages (one of them is Binary package), we have our main logic inside that framework and we have different targets that use this framework, everything works on the simulator, but running the app on the actual device provokes a crash saying "Binary framework was not found". We have like 20 other SPM packages that work fine, this is the first one we have an issue with. Please note I understand that SPM will not copy paste the Binary for the magic framework as it does for the apps so I suggested to embed it manually. So my question is what the best(easy) way to do it. Please refer to the following issue for more details: https://github.com/pendo-io/pendo-mobile-sdk/issues/233

Hi, I followed Xcode’s recommendation and migrated to the new strings format (*.strings → *.xcstrings) using the Migrate to String Catalog option. My project has two build targets: MyAppName MyAppNameVFSCopy Every time I build one or the other target, the value in the .xcstrings file changes under CFBundleName > en > stringUnit > value, switching between MyAppName and MyAppNameVFSCopy. As a result, Git detects a change in source control each time, which is quite annoying. How can I prevent this from happening? After building MyAppNameVFSCopy target, the "value" is MyAppNameVFSCopy "CFBundleName" : { "comment" : "Bundle name", "extractionState" : "extracted_with_value", "localizations" : { "en" : { "stringUnit" : { "state" : "new", "value" : "MyAppNameVFScopy" } } } } After building MyAppName target, the "value" changes to MyAppName "CFBundleName" : { "comment" : "Bundle name", "extractionState" : "extracted_with_value", "localizations" : { "en" : { "stringUnit" : { "state" : "new", "value" : "MyAppName" } } } } Deleting CFBundleName from *.xcstrings file didn't help. CFBundleName is automatically created again after building target. Both targets has it's on plist file. In those files: <key>CFBundleName</key> <string>${PRODUCT_NAME}</string> Attaching full xcstrings file InfoPlist.xcstrings

I have a swift project with a Watch companion. Since the update of Xcode in 16.3 version after updating MAcOs , Watch OS, iOS to the latest version . It is quasi impossible for me to make Xcode work with my series 10 Watch. I have a lot of alert box, messages in the "device & Simulator" tool like this Previous preparation error: A connection to this device could not be established.; Timed out while attempting to establish tunnel using negotiated network parameters. And many message telling me that Xcode is preparing the Watch , then that it has lost the connexion. I have to wait some minutes after EACH run of the App to test it again. This is very annoying . Some of the alerts I have : And the best to know , is that I can run the APP outside of Xcode , it works, Connects to the iPhone, fetch data and so. the iPhone sees the Watch without and problem. Reboots can solve for a few minutes the problem. But that is not a solution.

If I create an Xcode (version doesn't matter, 16.N )project of type framework then install some dependencies using SPM. Then within the Frameworks and Libraries section, the Embed part is empty. This doesn't happen if the project type is app rather than framework. If I want to set this to embed or not embed then how can this be done if its not even visible, for that matter how can I tell what it is set to even?

Hi. I have a xcframework that has a dependency on 'RxSwift' and 'RxCocoa'. I deployed it using SPM by embedding it in a Swift Package. However when I import swift package into another project, I keep getting the following error: "Missing required module 'RxCocoaRuntime" How can I fix this? Below are the steps to reproduce the error. Steps Create Xcode proejct, make a dependency on 'RxSwift' and 'RxCocoa' (no matter doing it through tuist or cocoapods) Create XCFramework from that proejct. (I used commands below) xcodebuild archive \ -workspace SimpleFramework.xcworkspace \ -scheme "SimpleFramework" \ -destination "generic/platform=iOS" \ -archivePath "./SimpleFramework-iphoneos.xcarchive" \ -sdk iphoneos \ SKIP_INSTALL=NO \ BUILD_LIBRARY_FOR_DISTRIBUTION=YES xcodebuild archive \ -workspace SimpleFramework.xcworkspace \ -scheme "SimpleFramework" \ -archivePath "./SimpleFramework-iphonesimulator.xcarchive" \ -sdk "iphonesimulator" \ SKIP_INSTALL=NO \ BUILD_LIBRARY_FOR_DISTRIBUTION=YES xcodebuild -create-xcframework \ -framework "./SimpleFramework-iphoneos.xcarchive/Products/Library/Frameworks/SimpleFramework.framework" \ -framework "./SimpleFramework-iphonesimulator.xcarchive/Products/Library/Frameworks/SimpleFramework.framework" \ -output "./SimpleFramework.xcframework" Embed in Swift Package, and deploy. // swift-tools-version: 6.0 // The swift-tools-version declares the minimum version of Swift required to build this package. import PackageDescription let package = Package( name: "SimplePackage", platforms: [.iOS(.v16)], products: [ .library( name: "SimplePackage", targets: ["SimplePackage"]), ], dependencies: [ .package(url: "https://github.com/ReactiveX/RxSwift", from: "6.8.0") ], targets: [ .binaryTarget( name: "SimpleFramework", path: "Sources/SimpleFramework.xcframework" ), .target( name: "SimplePackage", dependencies: [ "SimpleFramework", "RxSwift", .product(name: "RxCocoa", package: "RxSwift") ] ) ] ) Download Swift Package in another project and import module. I resolved this by removing dependencies from the Swift Package, downloading package in another project, and fetching dependencies by cocoapods. Thist works, but I don't want to use another dependency manager while using SPM. Development Environment CPU : Apple M4 Max MacOS : Sequoia 15.3 Xcode : 16.2

I have an app that connects to a BLE device and registers its services. I can create a notification when my app is running on foreground or background, but is it possible to show a notification when a message is recieved from the BLE device while the app has been killed by the user?