I am working on an app which plays audio - https://youtu.be/VbAfUk_eYl0?si=nJg5ayy2faWE78-g - and one of the features is, on restart, if you had paused playback of a file at the time the app was previously shut down (or were playing one at the time of shutdown), the paused state and position in the file is restored exactly as it was, on restart. The functionality works. However, it seems impossible to get the "now playing" information in iOS into the right state to reflect that via the MediaPlayer API. On restart, handlers are attached to the play/pause/togglePlayPause actions on MPRemoteCommandCenter.shared(), and the map of media info is updated on MPNowPlayingInfoCenter.default().nowPlayingInfo. What happens is that iOS's media view shows the audio as playing and offers a pause button - even though the play action is enabled and the pause action is disabled. Once playback has been initiated (my workaround is to have the pause action toggle the play state, since otherwise you wouldn't be able to initiate playback from controls in a car without initiating it once from a device first). I've created a simplified white-noise-player demo to illustrate the problem - simply build and deploy it, and then start the app, lock your device and look at the playback controls on the lock screen. It will show a pause button - same behavior I've described. https://github.com/timboudreau/ios-play-pause-demo I've tried a few things to narrow down the source of the issue - for example, thinking that not MPNowPlayingInfoPropertyPlaybackProgress and MPMediaItemPropertyPlaybackDuration might be the culprit (since the system interpolates elapsed time and it's recommended to update those properties infrequently) on startup might do the trick, but the result is the same, just without a duration or progress shown. What governs this behavior, and is there some way to explicitly tell the media player API your current state is paused?

Hello everyone, I've written an audio unit plugin that needs to be aware of any upstream latency caused by heavy plugins before it on the channel. Is there any way to query this? I know that Logic applies PDC at the channel's output (summing point), but I need to know what the accumulated latency is at the point the audio enters my plugin. Thanks!

We are currently working on a CarPlay navigation app and so far everything is working well except for speaking turn notifications. Our TTS implementation works fine on the phone and works fine on CarPlay if the voice is spoken over the speaker in the car. If users connect a BT headset to the car and listen through that headset, then the voice commands are chopped up / stutter. Why would users use BT headset? Well, we are working on a motorcycle app, and there are no speakers usually on a motorcycle. It sounds like the BT channel is opened and closed repeatedly for every character / word spoken. This happens on different CarPlay devices and different Bluetooth headsets, we have reports from multiple users that they find this behavior annoying and that other apps work fine. Is this a known issue? Are there possible workaround?

Hi all, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this?

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

I’m building a teleprompter-style app that relies on Picture in Picture. PiP starts correctly on device. Everything works — until another app (e.g. TikTok / Instagram) starts active video recording. When camera capture begins in the foreground app, iOS terminates my PiP session. Some teleprompter apps appear to keep PiP active while recording in other apps, so I’m trying to understand the recommended architectural pattern for this scenario. Is there a documented approach or best practice to keep PiP stable during third-party camera capture? Looking specifically for guidance on the correct AVKit / AVAudioSession configuration for this use case.

Hi everyone, We’re encountering an issue where AudioQueueNewOutput blocks indefinitely and never returns, and we’re hoping to get some insight or confirmation if this is a known behavior/regression on newer iOS versions. Issue Description When triggering audio playback, we create an output AudioQueue using AudioQueueNewOutput. On some devices, the call hangs inside AudioQueueNewOutput and never returns, with no OSStatus error and no subsequent logs. This behavior is reproducible mainly on iOS 18.3. Earlier iOS versions do not show this issue under the same code path. if (audioDes) { mAudioDes.mSampleRate = audioDes->mSampleRate; mAudioDes.mBitsPerChannel = audioDes->mBitsPerChannel; mAudioDes.mChannelsPerFrame = audioDes->mChannelsPerFrame; mAudioDes.mFormatID = audioDes->mFormatID; mAudioDes.mFormatFlags = audioDes->mFormatFlags; mAudioDes.mFramesPerPacket = audioDes->mFramesPerPacket; mAudioDes.mBytesPerFrame = audioDes->mBytesPerFrame; mAudioDes.mBytesPerPacket = audioDes->mBytesPerFrame; mAudioDes.mReserved = 0; } // Create AudioQueue for output OSStatus status = AudioQueueNewOutput( &mAudioDes, AQOutputCallback, this, NULL, NULL, 0, &audioQueue ); code-block The thread blocks inside AudioQueueNewOutput, and execution never reaches the next line. Additional Notes / Observations ASBD is confirmed to be valid Standard PCM output Sample rate, channels, bytes per frame/packet all consistent Same ASBD works correctly on earlier iOS versions AudioQueue is created on a background thread Not on the main thread Not inside the AudioQueue callback On first creation, AVAudioSession may not yet be active setCategory and setActive:YES may be called shortly before creating the AudioQueue There may be a timing window where the session is still activating Issue is reported mainly on iOS 18.3 Multiple user reports point to iOS 18.3 devices Same code path works on iOS 17.x and earlier No OSStatus error is returned — the call simply never returns. Questions Is it expected that AudioQueueNewOutput can block indefinitely while waiting for AVAudioSession / audio route / HAL readiness? Have there been any behavior changes in iOS 18.3 regarding AudioQueue creation or AudioSession synchronization? Is it unsafe to call AudioQueueNewOutput before AVAudioSession is fully active on recent iOS versions? Are there recommended patterns (or delays / callbacks) to ensure AudioQueue creation does not hang? Any insight or confirmation would be greatly appreciated. Thanks in advance!

Is there a way to destroy MIDIUMPMutableEndpoint again? In my app, the user has a setting to enable and disable MIDI 2.0. If MIDI 2.0 should not be supported (or if iOS version < 18), it creates a virtual destination and a virtual source. And if MIDI 2.0 should be enabled, it instead creates a MIDIUMPMutableEndpoint, which itself creates the virtual destination and source automatically. So here is my problem: I didn't find any way to destroy the MIDIUMPMutableEndpoint again. There is a method to disable it (setEnabled:NO), but that doesn't destroy or hide the virtual destination and source. So when the user turns MIDI 2.0 support off, I will have two virtual destinations and sources, and cannot get rid of the 2.0 ones. What is the correct way to get rid of the MIDIUMPMutableEndpoint once it is created?

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.

Environment Device: iPhone 16e iOS Version: 18.4.1 - 18.7.1 Framework: AVFoundation (AVAudioEngine) Problem Summary On iPhone 16e (iOS 18.4.1-18.7.1), the installTap callback stops being invoked after resuming from a phone call interruption. This issue is specific to phone call interruptions and does not occur on iPhone 14, iPhone SE 3, or earlier devices. Expected Behavior After a phone call interruption ends and audioEngine.start() is called, the previously installed tap should continue receiving audio buffers. Actual Behavior After resuming from phone call interruption: Tap callback is no longer invoked No audio data is captured No errors are thrown Engine appears to be running normally Note: Normal pause/resume (without phone call interruption) works correctly. Steps to Reproduce Start audio recording on iPhone 16e Receive or make a phone call (triggers AVAudioSession interruption) End the phone call Resume recording with audioEngine.start() Result: Tap callback is not invoked Tested devices: iPhone 16e (iOS 18.4.1-18.7.1): Issue reproduces ✗ iPhone 14 (iOS 18.x): Works correctly ✓ iPhone SE 3 (iOS 18.x): Works correctly ✓ Code Initial Setup (Works) let inputNode = audioEngine.inputNode inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioEngine.start() Interruption Handling NotificationCenter.default.addObserver( forName: AVAudioSession.interruptionNotification, object: AVAudioSession.sharedInstance(), queue: nil ) { notification in guard let userInfo = notification.userInfo, let typeValue = userInfo[AVAudioSessionInterruptionTypeKey] as? UInt, let type = AVAudioSession.InterruptionType(rawValue: typeValue) else { return } if type == .began { self.audioEngine.pause() } else if type == .ended { try? self.audioSession.setActive(true) try? self.audioEngine.start() // Tap callback doesn't work after this on iPhone 16e } } Workaround Full engine restart is required on iPhone 16e: func resumeAfterInterruption() { audioEngine.stop() inputNode.removeTap(onBus: 0) inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioSession.setActive(true) try audioEngine.start() } This works but adds latency and complexity compared to simple resume. Questions Is this expected behavior on iPhone 16e? What is the recommended way to handle phone call interruptions? Why does this only affect iPhone 16e and not iPhone 14 or SE 3? Any guidance would be appreciated!

When multiple identical songs are added to a playlist, Playlist.Entry.id uses a suffix-based identifier (e.g. songID_0, songID_1, etc.). Removing one entry causes others to shift, changing their .id values. This leads to diffing errors and collection view crashes in SwiftUI or UIKit when entries are updated. Steps to Reproduce: Add the same song to a playlist multiple times. Observe .id.rawValue of entries (e.g. i.SONGID_0, i.SONGID_1). Remove one entry. Fetch playlist again — note the other IDs have shifted. FB18879062

My audio app shows a control bar at the bottom of the window. The controls show nicely, but there is a black "slab" appearing behind the inline controls, the same size as the playerView. Setting the player view background color does nothing: playerView.wantsLayer = true playerView.layer?.backgroundColor = NSColor.clear.cgColor How can I clear the background? If I use .floating controlsStyle, I don't get the background "slab".

Hi, I've had a new deck installed in my car for about 1.5 weeks. I'm having compatibility issues with my 15PM. It happens both wired and wirelessly, I get the error "Accessory not supported by this device". It used to happen all the time, now it's 50/50. Sometimes it works. I've removed and added Bluetooth multiple times on phone and deck, I bought a belkin usb-c to usb-a cable today and it seems to fix it but the problem comes back. I've changed the setting "FaceID and passcode-allow access when locked-accessories." The car stereo guy reckons it's definitely an issue with the phone not the deck, I'm inclined to believe him since the error states "by this device". Any advice appreciated.

In my app I use AVAssetReaderTrackOutput to extract PCM audio from a user-provided video or audio file and display it as a waveform. Recently a user reported that the waveform is not in sync with his video, and after receiving the video I noticed that the waveform is in fact double as long as the video duration, i.e. it shows the audio in slow-motion, so to speak. Until now I was using CMFormatDescription.audioStreamBasicDescription.mSampleRate which for this particular user video returns 22'050. But in this case it seems that this value is wrong... because the audio file has two audio channels with different sample rates, as returned by CMFormatDescription.audioFormatList.map({ $0.mASBD.mSampleRate }) The first channel has a sample rate of 44'100, the second one 22'050. If I use the first sample rate, the waveform is perfectly in sync with the video. The problem is given by the fact that the ratio between the audio data length and the sample rate multiplied by the audio duration is 8, double the ratio for the first audio file (4). In the code below this ratio is given by Double(length) / (sampleRate * asset.duration.seconds) When commenting out the line with the sampleRate variable definition in the code below and uncommenting the following line, the ratios for both audio files are 4, which is the expected result. I would expect audioStreamBasicDescription to return the correct sample rate, i.e. the one used by AVAssetReaderTrackOutput, which (I think) somehow merges the stereo tracks. The documentation is sparse, and in particular it’s not documented whether the lower or higher sample rate is used; in this case, it seems like the higher one is used, but audioStreamBasicDescription for some reason returns the lower one. Does anybody know why this is the case or how I should extract the sample rate of the produced PCM audio data? Should I always take the higher one? I created FB19620455. let openPanel = NSOpenPanel() openPanel.allowedContentTypes = [.audiovisualContent] openPanel.runModal() let url = openPanel.urls[0] let asset = AVURLAsset(url: url) let assetTrack = asset.tracks(withMediaType: .audio)[0] let assetReader = try! AVAssetReader(asset: asset) let readerOutput = AVAssetReaderTrackOutput(track: assetTrack, outputSettings: [AVFormatIDKey: Int(kAudioFormatLinearPCM), AVLinearPCMBitDepthKey: 16, AVLinearPCMIsBigEndianKey: false, AVLinearPCMIsFloatKey: false, AVLinearPCMIsNonInterleaved: false]) readerOutput.alwaysCopiesSampleData = false assetReader.add(readerOutput) let formatDescriptions = assetTrack.formatDescriptions as! [CMFormatDescription] let sampleRate = formatDescriptions[0].audioStreamBasicDescription!.mSampleRate //let sampleRate = formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate }).max()! print(formatDescriptions[0].audioStreamBasicDescription!.mSampleRate) print(formatDescriptions[0].audioFormatList.map({ $0.mASBD.mSampleRate })) if !assetReader.startReading() { preconditionFailure() } var length = 0 while assetReader.status == .reading { guard let sampleBuffer = readerOutput.copyNextSampleBuffer(), let blockBuffer = sampleBuffer.dataBuffer else { break } length += blockBuffer.dataLength } print(Double(length) / (sampleRate * asset.duration.seconds))

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

Hi everyone! I’ve developed a location-based Audio AR app in Unity with FMOD &amp; Resonance Audio and AirPods Pro Head-Tracking to create a ubiquitous augmented soundscape experience. Think of it as an audio version of Pokémon Go, but with a more precise location requirement to ensure spatial audio is placed correctly. I want this experience to run in the background on iOS, but from what I’ve gathered, it seems Unity doesn’t support this well. So, I’m considering developing a Swift version instead. Since this is primarily for research purposes, privacy concerns are not a major issue in my case. However, I’ve come across some potential challenges: Real-time precise location updates – Can iOS provide fully instantaneous, high-accuracy location updates in the background? Continuous real-time data processing – Can an app continuously process spatial audio, head-tracking, and location data while running in the background? I’m not sure if newer iOS versions have improved in these areas or if there are workarounds to achieve this. Would this kind of experience be feasible to run in the background on iOS? Any insights or pointers would be greatly appreciated! I’m very new to iOS development, so apologies if this is a basic question. Thanks in advance!

I have an app that displays artwork via MPMediaItem.artwork, requesting an image with a specific size. How do I get a media item's MPMediaItemAnimatedArtwork, and how to get the preview image and video to display to the user?

hi, Is there an Audio Unit logo I can show on my website? I would love to show that my application is able to host Audio Unit plugins. regards, Joël

Is there any way for me to use an AutoMix api in my IOS apps, I would play tracks using the Apple Music api and use AutoMix to attempt to merge tracks. Is this feature/api available to developers.