We are embedding TikTok Live streams inside our iOS app using WKWebView. The Live stream loads and plays normally at first. However, when the app goes to the background (for example, user presses the Home button or switches apps) and then returns to the foreground, the TikTok Live video and audio become paused and do not resume automatically. Expected behavior When the app returns from the background to the foreground, the video/audio should resume playback automatically Actual behavior Video/audio pauses after app resumes from background Any guidance would be greatly appreciated. Thank you.

On iOS Devices with ProMotion (120HZ) if you animate Elements on your Page with animation-timeline you get Ghosting Effects. You can not see the Ghosting with a Simulator or on Screenshots, only on real Devices. To Reproduce I made a Minimal Example: https://codesandbox.io/p/sandbox/120hztest-xrwgtc When you scroll quickly on the Page with an iOS 120HZ Device (https://en.wikipedia.org/wiki/List_of_smartphones_with_a_high_refresh_rate_display) you will see ghosting on the Top of the right Element (animation-timeline) and no ghosting on the other animated Element. (I edited the Screenshot, to Illustrate how the Effect looks like, since it is only visible on the real Display)

Scenario Overview: In our app, we open an in-app browser to complete a third-party consent flow. The sequence is: App → Website A (set cookie and redirect) → Google → Website A (check cookie) → App After upgrading the app, the first consent attempt fails because the cookie cannot be written, causing the check cookie step to fail. However, if we use the native Safari browser, this issue does not occur. Observed Behavior: Scenario Result Upgrade app → Consent ❌ Fail Upgrade app → Consent fail → Consent again immediately ✅ Pass Upgrade app → Consent fail → Upgrade again after 1–2h → Consent ✅ Pass Upgrade app → Consent fail → Upgrade again after 1d → Consent ❌ Fail Install a new app → Consent ✅ Pass Upgrade app → Consent, cancel flow → Consent again ✅ Pass Install new app → Wait for upgrade → Upgrade app → Consent ✅ Pass Install new app → Wait 1–2h → Upgrade app → Consent ✅ Pass Investigation: From Safari documentation, this seems related to Intelligent Tracking Prevention (ITP), which restricts cross-site cookie behavior during first-party interactions. However, I haven’t found a clear mitigation strategy yet. Question: Has anyone encountered similar issues with Safari ITP after app upgrades? Are there recommended approaches to ensure cookies persist across this redirect flow?

After App uses Network.framework PrivacyContext Api, dns has been encrypted, that is good. But when using wkwebview to load web page, wireshark captures normal dns request sent by wkwebview. Does wkwebview use DoH to resolve domain? if can, how to config params? If can not, is there anyway to stop wkwebview sending normal dns, such as local proxy.

It’s the small things that make a difference, and the three dots at the top of the screen in Safari and Chrome are such examples. I’ve already accidentally deleted several tab groups by accident and try to relearn browsing is harder than it should be.

Hi everyone, I’m building a React Native iOS app where I’m integrating Wazo (native WebRTC) and Jitsi (WebView / WebRTC). Use case: Wazo is used to maintain a background call session (mainly signaling + audio keep-alive). Jitsi is used in the foreground for video calls. Problem: When Jitsi starts, it takes control of the microphone and camera. The Wazo call disconnects after ~5 minutes (likely due to media / audio session conflict). Even if Wazo audio/video is muted or tracks are disabled, the session still drops. My questions: Is it officially supported or recommended to run two WebRTC stacks (Wazo + Jitsi) simultaneously on iOS? Can Wazo stay connected without active audio/video tracks while Jitsi uses mic/camera? Is there a way to release Wazo media streams temporarily (but keep signaling alive) while Jitsi is loading or active? Are there any AVAudioSession / background mode limitations on iOS that make this impossible by design? If this is not supported, what is the recommended architecture (single WebRTC pipeline, switching media ownership, etc.)? Environment: iOS (React Native) Wazo SDK (native WebRTC) Jitsi Meet (WebView) CallKit + PushKit enabled Any guidance, documentation, or real-world experience would be greatly appreciated. Thanks in advance 🙏

Hello, I am implementing video calling on iOS and need to support Picture in Picture (PiP) behavior similar to FaceTime or WhatsApp. What works Audio continues correctly in background CallKit UI works as expected Video works correctly while the app is in the foreground What I’m trying to achieve When the user presses the Home button or switches apps, I want to show a system Picture in Picture window (floating video outside the app). Current setup Video is rendered via WebRTC The video is displayed inside a WKWebView (HTML / JavaScript) PiP works only while the app is foregrounded When the app backgrounds, the video disappears (only audio remains) Questions Does iOS support system Picture in Picture for: WebRTC video WKWebView / HTML video 2 Is AVPictureInPictureController limited only to: AVPlayerLayer AVSampleBufferDisplayLayer 3 If PiP requires native rendering: Is it mandatory to render WebRTC frames natively using AVSampleBufferDisplayLayer? Is PiP explicitly unsupported for WebView / HTML video? 📌 Clarification Apps like FaceTime and WhatsApp are able to show PiP outside the app. I want to understand whether this behavior is achievable only with native video pipelines, or if WebView-based video is fundamentally restricted by iOS. Any official clarification or documentation reference would be appreciated. Thank you.

Touch not working to close in-app close-ups since latest iOS 26 update

I am following up on Thread (https://developer.apple.com/forums/thread/733233). Currently, SFSafariExtensionManager.getStateOfSafariExtension only returns if an extension is enabled, but not if "Allow in Private Browsing" is toggled on. Is there an API in macOS 26 and Safari 19 that allows a native Safari App Extension to detect this specific permission?

Cross posting from Spatial Computing, apologies if this is not the appropriate forum. The purpose is to create a simple web-based gallery of spatial photos and videos using static html files. I have successfully displayed spatial photos using the img tag and IMG.heic files. I can tap and hold the image to bring up the contextual menu and from there select View Spatial Photo. Is there any way to add a control to the image, like a link or overlay on the image itself, that a user can simply tap to show the image in 3D? And how to host a (small!) video file on a web page without going through a CDN/streaming service? Sample html would be much appreciated.

Description: In our app, we have login page which displayed in WKWebView. In that page, there is an Remember my Device cookie option which user can select, so next time it OTP page will not be displayed. Problem Statement: Recently we found that some issue happened with this cookie. Especially, when users upgraded their OS versions to 18.6 or 26.1 or 26.2. Need to understand, any changes related to Cookie part in latest OS Versions?

I coded two demo websites as follows (both written in NextJS): Website 1: I coded an interval counter that increments every 1 second. Website 2: I used the MediaRecorder API (described in the WebKit documentation: https://webkit.org/blog/11353/mediarecorder-api/). In the ondataavailable function, I periodically send a blob (once every 1 second) to my server. In the backend, I coded a POST API to upload this blob. I noticed that with website 1, the interval doesn't work when I run Safari in the background, even on iOS and iPadOS. However, website 2 works, meaning it still calls my API normally (I tried running Safari in the background for about 1-2 hours and it worked). So, does this mean Apple allows native APIs like MediaRecorder and its callbacks to run in the background?

I’m encountering an issue on iOS when rendering a list using React. Each list item uses the array index as the React key and consists of two parts: a header section that uses position: sticky for dynamic sticking behavior, and a body section whose height is automatically adjusted based on its content. When the list data is updated, I sometimes observe that the sticky header content does not update visually in time, even though the underlying data and DOM have changed. // demo.jsx import React, { useState } from 'react'; import { Button } from '@iftide/mobile'; import './style2.less'; // import data1 from './data1.json'; // import data2 from './data2.json'; const prefixCls = 'im-detaillist'; const data1 = [ { sectionTitle: '2025年05月' }, { sectionTitle: '2025年04月' }, { sectionTitle: '2025年03月' } ]; const data2 = [ { sectionTitle: '2023年08月' }, { sectionTitle: '2023年07月' }, { sectionTitle: '2023年06月' }, { sectionTitle: '2023年05月' } ]; export default function App() { const [list, setList] = useState(data1); const [toggle, setToggle] = useState(true); return ( <div> <Button title="更新2" onClick={() => { setToggle(!toggle); setList(data2); }} /> <div className={`${prefixCls}-container2`} style={{ height: `700px` }}> {list.map((section: any, sectionIdx: number) => { return ( <div className={`${prefixCls}`} key={String(sectionIdx)} // id={section.sectionTitle} > <div className={`${prefixCls}-section-title`} role="text"> {section.sectionTitle} </div> <div style={{ background: 'green', height: `${Math.ceil(400 * Math.random()) + 50}px` }} > 省略 </div> </div> ); })} </div> </div> ); } .@{prefixCls}-section-title { position: sticky; position: -webkit-sticky; will-change: transform; top: 0; z-index: 1; padding-left: 11px; width: 100%; height: 30px; font-size: var(--font-size-s); font-weight: 400; line-height: 30px; color: #000000; background-color: #F4F5F7; letter-spacing: 0; }

Please kindly improve the Safari browser side bar implementation further along with what The Browser Company has done with their Arc browser. Arc is about to retire soon too and they're willing to sell their SwiftUI code perhaps too for a decent pile of dollars, not the Jony Ive piles at least it should not. The toggle for side bar is nice and works perfect though!

When trying to login using apple account it shows me this error "Your request could not be completed because of an error. Please try again later." although in the inspector everything looks fine (200)

The passkey authentication dialog appears, and after unlocking with Touch ID, the dialog closes without any notification of success or failure. This issue occurs with high frequency. access to the https://passkeys-demo.appspot.com/ register account and create passkey. logoff access to the url again you can see the passkey dialog unlock device then the dialog disappears nothing happens reload the page proceed 5) to 6) nothing happens or success webauthn.

I am maintaining a PWA that utilizes WebSockets. In this app, after the web page is loaded from the server, JavaScript establishes a WebSocket connection. Because the app connects to a completely local server on a managed local network, we use http:// and ws:// (non-secure). The Issue: The app worked perfectly from older iOS versions up to iPadOS 18. However, during testing on iPadOS 26, we encountered an issue where the WebSocket connects successfully but is disconnected by the iPad approximately one second later. According to our packet captures, the iPad is sending a FIN packet to initiate the teardown. Additional Context: What makes this particularly confusing is that we have another server hosting the exact same PWA where the WebSocket connection stays stable even on iPadOS 26. This suggests it might not be a universal OS bug, but perhaps related to specific network conditions or a new security policy. Has anyone experienced similar behavior on iPadOS 26? Could this be a bug, or is there a new security restriction regarding non-secure WebSocket (ws://) connections in local networks? Are there any known changes in WebKit/Safari for iPadOS 26 that might cause the OS to send a FIN packet immediately after a handshake? I would appreciate any insights or suggestions on what might be causing this.

The crash is specific to iOS 26.2 prior versions working fine. WKScriptMessageHandler delegate func userContentController(_ userContentController: WKUserContentController, didReceive message: WKScriptMessage) Name attribute is accessible but WKScriptMessage body attribute causes crash The object seems to be not accessible(not in memory) self.webkit.configuration.userContentController.add(self, name: "sampleHandler") self.webkit.load(request) func userContentController(_ userContentController: WKUserContentController, didReceive message: WKScriptMessage) { print(message.name) // works print(message.body) // crashes }

Bit of an odd one here, just keen to understand if it’s just me or a more generic issue. For all other apps, I can drag the icon from the dock to place into stage manager left, centre or right. However when I try to do the same with Safari (and only Safari), it just doesn’t work at all. I can repeat this 100%, has been an issue with 26.0, 26.1 and now 26.2. Can confirm this isn’t a problem on my 11” M4 iPad pro running same O/S. Here is a video showing the issue (YouTube) https://youtu.be/0WBGBZVHsfs

I'm in the process of supporting Apple Pay through a 2nd payment gateway for some users, so I need to support two separate Apple Pay relationships. Both require their own apple-developer-merchantid-domain-association. I don't see how I can have both files for the one domain. Is this possible? Is there a workaround other than just replacing the old file with the new one and hoping that doesn't disrupt anything. That seems to be the approach taken by others (https://developer.apple.com/forums/thread/695538) but it is too high risk for me without any confirmation from Apple that this is ok. I'd also like to avoid having to setup a 2nd domain for these customers, since the current domain is already quite embedded in their operations.