Hello, Thank you for your time. I have a question regarding visionOS app development. When placing a SwiftUI TextField inside RealityView.attachments, we found that focusing on the field does not bring up the virtual keyboard in front of the user. Instead, the keyboard appears around the user’s lower abdomen area. However, when placing the same TextField in a regular SwiftUI layer outside of RealityView, the keyboard appears in the correct position as expected. This suggests that the issue is specific to RealityView.attachments. We are currently exploring ways to have the virtual keyboard appear directly in front of the user when using TextField inside RealityViewAttachments. If there is any method to explicitly control the keyboard position or any known workarounds—including alternative UI approaches—we would greatly appreciate your guidance. Best regards, Sadao Tokuyama

We are working on a world scale AR app that leverages the device location and heading to place objects in the streets, so that they are correctly and stably anchored to certain locations. Since the geo-tracking imagery is only available in certain cities and areas, we are trying to figure out how to fallback when geo-tracking is not available as the device move away, to still retain good AR camera accuracy. We might need to come up with some algorithm using the device GPS, to line up the ARCamera with our objects. Question: Does geo-tracking always provide greater than or equal to the accuracy of world tracking, for a GPS outdoor AR experience? If so, we can simply use the ARGeoTrackingConfiguration for the entire time, and rely on the ARView keeping itself aligned. Otherwise, we need to switch between it and ARWorldTrackingConfiguration when geo-tracking is not available and/or its accuracy is low, then roll our own algorithm to keep the camera aligned. Thanks.

是对原本VisionPro每个App的内存限制做了扩展嘛？放宽了内存限制么？

Basically, take just the Xcode 26 AR App template, where we put the ContentView as the detail end of a NavigationStack. Opening app, the app uses < 20MB of memory. Tapping on Open AR the memory usage goes up to ~700MB for the AR Scene. Tapping back, the memory stays up at ~700MB. Checking with Debug memory graph I can still see all the RealityKit classes in the memory, like ARView, ARRenderView, ARSessionManager. Here's the sample app to illustrate the issue. PS: To keep memory pressure on the system low, there should be a way of freeing all the memory the AR uses for apps that only occasionally show AR scenes.

Dear all, I´m using Unity 6.2 beta and Xcode 16.2. I´m creating a simple framework to use the text to speech functionality in VisionOS from unity. The framework is created in Swift. I create an objective-c wrapper with the following declarations: ... void _initTTS(int); ... I create the framework, import it in Unity and call the functions in a c# wrapper class. The code is as follows: public static class TTSPluginManager { [DllImport("TTS_Vision"] private static extern void _initTTS(int val); ... public static void Initialize() { #if UNITY_VISIONOS _initTTS(0); #else Debug.LogWarning("NativeTTS.Initialize called on a non-iOS platform. Ignoring."); #endif } } I have managed to compile and run the program in the Apple Vision Pro, but I keep on getting the following error: DllNotFoundException: TTS_Vision assembly: type: member:(null) TTSPluginManager.Initialize () (at Assets/Plugins/TTSPluginManager.cs:33) LecturePortalManager.OnCreateStory (Ink.Runtime.Story story) (at Assets/AVRLecture/LecturePortalManager.cs:17) InkLoader.StartStory () (at Assets/AVRLecture/InkLoader.cs:24) InkLoader.Start () (at Assets/AVRLecture/InkLoader.cs:18) If I run the generated code from Xcode, I can see the app in the AVP, but I keep getting a loading error: DllNotFoundException: Unable to load DLL 'TTS_Vision'. Tried the load the following dynamic libraries: Unable to load dynamic library '/TTS_Vision' because of 'Failed to open the requested dynamic library (0x06000000) dlerror() = dlopen(/TTS_Vision, 0x0005): tried: '/TTS_Vision' (no such file) at TTSPluginManager.Initialize () [0x00000] in <00000000000000000000000000000000>:0 at LecturePortalManager.OnCreateStory (Ink.Runtime.Story story) [0x00000] in <00000000000000000000000000000000>:0 I can see in the generated code that the framework (TTS_Vision) is there, but the path seems wrong. I've tried to add more options to the searched paths, with no success... Any hints or suggestions are much more appreciated.

For visionOS 2.0+, it has been announced the object tracking feature. Is there any support for PolySpatial in Unity or is it only available in Swift and Xcode?

Hi, is there a way to track feet in a visionOS app in an immersive space? I want the whole body to be visible in VR, and I want to know if the user touches an object with their foot.

I use ARKit for motion tracking. I get the skeleton joint coordinates and use them for animation. I didn't make any changes to the code, but I updated the iOS version from 18 to 26, and modelTransform now always returns nil. https://developer.apple.com/documentation/arkit/arskeleton3d/modeltransform(for:) For example bodyAnchor.skeleton.modelTransform(for: .init(rawValue: "head_joint")) bodyAnchor is ARBodyAnchor. I see the default skeleton on the screen, but now I can't get the coordinates out of it. I'm using an example from Apple's WWDC presentation. https://developer.apple.com/documentation/arkit/capturing-body-motion-in-3d Are there any changes in the API? Or just bug?

I have already add liscene and entitlement for Passthrough in screen capture, but still get black background instaed of real world. Do you have any idea ? I've been stuck with this question for a long time 😢

The WWDC25 video and notes titled “Learn About Apple Immersive Video Technologies” introduced the Apple Spatial Audio Format (ASAF) and codec (APAC). However, despite references throughout on using immersive video, there is scant information on ASAF/APAC (including no code examples and no framework references), and I’ve found no documentation in Apple’s APIs/Frameworks about its implementation and use months on. I want to leverage ambisonic audio in my app. I don’t want to write a custom AU if APAC will be opened up to developers. If you read the notes below along with the iPhone 17 advertising (“Video is captured with Spatial Audio for immersive listening”), it sounds like this is very much a live feature in iOS26. Anyone know the state of play? I’m across how the PHASE engine works, which is unrelated to what I’m asking about here. Original quote from video referenced above: “ASAF enables truly externalized audio experiences by ensuring acoustic cues are used to render the audio. It’s composed of new metadata coupled with linear PCM, and a powerful new spatial renderer that’s built into Apple platforms. It produces high resolution Spatial Audio through numerous point sources and high resolution sound scenes, or higher order ambisonics.” ”ASAF is carried inside of broadcast Wave files with linear PCM signals and metadata. You typically use ASAF in production, and to stream ASAF audio, you will need to encode that audio as an mp4 APAC file.” ”APAC efficiently distributes ASAF, and APAC is required for any Apple immersive video experience. APAC playback is available on all Apple platforms except watchOS, and supports Channels, Objects, Higher Order Ambisonics, Dialogue, Binaural audio, interactive elements, as well as provisioning for extendable metadata.”

Hi! I attempted to run a sample project for detecting human pose in photos, which can be found here: https://developer.apple.com/documentation/vision/detecting-human-body-poses-in-3d-with-vision The project works perfectly when run on my Macbook Pro M1, but it fails on Apple Vision Pro. After selecting the photo an endless loading screen is presented and the following output is produced in the console: Failed to initialize 2D Detection Algorithm. Failed to initialize 2D Pose Estimation Algorithm. Failed to initialize algorithm modules Network path is nil: (null) Failed to initialize 2D Detection Algorithm. Failed to initialize 2D Pose Estimation Algorithm. Failed to initialize algorithm modules Unable to perform the request: Error Domain=com.apple.Vision Code=9 "Async status object reported as failed but without an error" UserInfo={NSLocalizedDescription=Async status object reported as failed but without an error}. de-activating session 70138 after timeout It seems that VNDetectHumanBodyPose3DRequest is failing on Vision Pro for some reason. Are there any additional requirements for running Vision framework on VisionOS, that I might be missing?

Hi! I attempted running a sample project for detecting human pose in 3D with vision framework, that can be found here: https://developer.apple.com/documentation/vision/detecting-human-body-poses-in-3d-with-vision. It works perfectly on my Macbook Pro M1, but fails on Apple Vision Pro. After selecting a photo, an endless loading screen is displayed and the following message is produced in the console: Failed to initialize 2D Detection Algorithm. Failed to initialize 2D Pose Estimation Algorithm. Failed to initialize algorithm modules Network path is nil: (null) Failed to initialize 2D Detection Algorithm. Failed to initialize 2D Pose Estimation Algorithm. Failed to initialize algorithm modules Unable to perform the request: Error Domain=com.apple.Vision Code=9 "Async status object reported as failed but without an error" UserInfo={NSLocalizedDescription=Async status object reported as failed but without an error}. de-activating session 70138 after timeout Is human pose detection expected to work on VisionOS? Is there any special configuration required, that I might be missing?

Hi, we have been working on an application that attaches a hand model to the users hands. Apple provides an animating hand models in visionOS project that is a useful starting point. https://developer.apple.com/documentation/visionOS/animating-hand-models-in-visionOS We have been trying to create our own hand model to attach but have had some issues with how it is attaching to the hand. For our hand model we want to include the forearm all the way up to the users elbow. I have attached a sample project of what our code currently looks like so you can run it. Just select show immersive space to attach the models. The left hand model is the space glove that we were trying to mirror. The right hand model is our model that we have been using. I have mapped each of the joints to the pertaining joint name on our model. The first issue we are having seems to be based around the placement of the forearm. It attaches itself at the wrist. The second issue seems to be around rotation. Our team is looking for some guidance on what needs to change in order to map this model correctly. Thanks in advance!

Hello, I am building a kiosk-style app for VisionOS which will be used in Guided Access mode, to be given to various visitors. So each of them will do hands + eyes setup, standard Guided Access thing. I want my experience to auto-start playing content when setup is done. I looked everywhere, but found no way do detect whether setup is complete? Also adding any kind of interface to start the app manually is risky, since buttons etc remain visible an interactable WHILE setup takes place. Delay-based approach also wont work, since setup can be skipped, or failed, or be done quickly, slowly... So it takes between 10 seconds and a few minutes. So the question is - is there any way to get notification, or check some bool or something that will tell me that Hands + Eyes setup in Guided mode is complete (or skipped)? Thanks in advance!

Spatial widget is a new feature of visionos 26. I notice The system’s Photo app can add a Spatial Image in the widget. I wonder if third apps can use spatial image or any 3D content in it's widget? I try to use RealityView in widget and it run with a crash. So does spatial Image in widget only supported by the system Photo app, and not available to developers now?

Apple, please provide access to face tracking blend shapes on vision os, just like you do on iOS. You have the best eye and face tracking implementation on the market, please let us use it. There is a sizable audience who will buy the headset just for it. I personally know multiple people who are not buying the headset simply because you locked those features out. No raw camera access is needed, just abstracted blendshapes values. You will make the headset so much more useful if you do this simple thing.

I would like to translate info in a three.js based web app as a 3D model in a volumetric window. Is it possible to do this in a similar manner as loading a web page in a WKWebView?

With iOS26 unveiled, has anyone noticed or found any changes related to RoomPlan? I can't find anything myself, which is disappointing. Has anyone found any improvements or changes?

Dear Apple Team, I’m a high school student (vocational upper secondary school) working on my final research project about LiDAR sensors in smartphones, specifically Apple’s iPhone implementation. My current understanding (for context): I understand Apple’s LiDAR uses dToF with SPAD detectors: A VCSEL laser emits pulses, a DOE splits the beam into a dot pattern, and each spot’s return time is measured separately → point cloud generation. My specific questions: How many active projection dots does the LiDAR projector have in the iPhone 15 Pro vs. iPhone 12 Pro? Are the dots static or do they shift/move over time? How many depth measurement points does the system deliver internally (after processing)? What is the ranging accuracy (cm-level precision) of each measurement point? Experimental background: Using an IR night vision camera, I counted approximately 111 dots on the 15 Pro vs. 576 dots on the 12 Pro. Do these match the internal specifications? Photos of my measurements are available if helpful. Contact request: I would be very grateful if you could connect me with an Apple engineer or ARKit specialist who works with LiDAR technology. I would love to ask follow-up questions directly and would be happy to provide my contact details for this purpose. These specifications would be essential for my research paper. Thank you very much in advance! Best regards, Max! Vocational Upper Secondary School Hans-Leipelt-Schule Donauwörth Research Project: “LiDAR Sensor Technology in Smartphones”

I've got an Immersive scene that I want to be able to bring additional users into via SharePlay where each user would be able to see (and hopefully interact) with the Immersive scene. How does one implement that?