I want to open the control center in Vision Pro’s Xcode simulator. Can I open it? If I can, please tell me how to do it. Thank you.

I want to make a model with added bones move by dragging it with gestures，This is a model exported using Blender， What I understand is using IKComponent, but I don't know how to use it specifically

Has Roomplan been abandoned? Two years have gone by without comments from Apple on improvements. Are the improvements behind the scenes? Is there going to be any major updates?

We're trying to switch from using main camera access on Arkit to screen-capture with passthrough however we're facing some issues and it seems a bit complicated to debug. We have set up a broadcast Extension, set up some logs on the sample Handler but we get nothing in the console nor that the recording starts, we set up the picker as well and we can see our extension in the control center as one of the choices but clicking start, results in it stopping in less than one second after. The only message that is rather contradictory we see in the console.app is the following [INFO] -[RPRecordingManager getSystemBroadcastExtensionInfo:]_block_invoke:1333 Extension has passthrough license and just right after [INFO] -[RPRecordingManager getSystemBroadcastExtensionInfo:]_block_invoke:1336 Extension does not have passthrough license

I posted https://developer.apple.com/forums/thread/809481 yesterday about an issue I discovered with pushWindow in visionOS 26.2 RC, but today I discovered a second problem with pushWindow. If window A calls pushWindow to present window B, and the user pins window B to a wall, the following unexpected behaviors are observed: Window B spontaneously disappears. If the user re-launches the (still running) app from the visionOS home view, both window A and window B appear simultaneously. I assume only window B should be visible at this point, since window A pushed window B. If the user closes window B, it's now impossible to present window B again. Calls to pushWindow appear to be ignored. If the user force-quits the app and relaunches it, and pushWindow is called again, window B appears, but window A remains visible. I also noticed this surprising behavior: This broken state of pushWindow behavior now affects all other apps on the system that may call pushWindow in the future, not just the app whose pushed window was pinned above. A workaround is to reboot the device, and then the system will behave as expected until the next time the user pins a pushed window.

I'm trying to run a PhotogrammetrySession based on photos taken in an AVCaptureSession and stored as .heic files. When I load the files I'm always seeing the error "Sample 0 missing LiDAR point cloud!" showing up for each individual sample. Debugging shows that sample.depthDataMap is populated, also the .heic contains depth data which can be extracted using e.g. heif-convert on my Mac. Comparing the .heic I created to one of the ObjectCaptureSession which doesn't show the LiDAR warning, I noticed the only difference being the HEIC information here: So my questions are: Are these the missing information in my manual capture causing this warning? Can I somehow add these information in an AVCaptureSession? Do these information allow better photogrammetry results?

I recently added pushWindow to my app, and I discovered that in visionOS 26.2 RC (23N301), pushWindow followed by dismissWindow no longer works as expected. Specifically, if the user moves the pushed window, then when the pushed window is later dismissed, the parent window's position isn't aligned with the pushed window's new position. Its original position is restored instead. Curiously, the bug only happens when an app is launched from the visionOS home view, and not when an app is launched from Xcode. It also doesn't happen in the visionOS 26.2 simulator. Another interesting detail is that while the parent window is hidden, if the user long-presses the Digital Crown and then dismisses the pushed window, the parent window's position seems to be immune from the Digital Crown scene reorientation. It's restored to its original real world position. Demo video: https://youtu.be/zR3t2ON3Wz0 I've submitted feedback as FB21287011 with a sample app and detailed repro steps. Has anyone else encountered this issue already and figured out a workaround? It would be nice if I could get pushWindow to work correctly in my app. Thanks everybody! 😀

Sorry for the cross-post but it's now two days in and this isn't fixed. If you try to use Xcode 16.3b3 with visionOS, it won't download the visionOS SDK, gives a 'network error' so you can't use the latest beta for Apple Vision Pro. FB16927025 FB16917874 FB16910449

Hi, we have been working on an application that attaches a hand model to the users hands. Apple provides an animating hand models in visionOS project that is a useful starting point. https://developer.apple.com/documentation/visionOS/animating-hand-models-in-visionOS We have been trying to create our own hand model to attach but have had some issues with how it is attaching to the hand. For our hand model we want to include the forearm all the way up to the users elbow. I have attached a sample project of what our code currently looks like so you can run it. Just select show immersive space to attach the models. The left hand model is the space glove that we were trying to mirror. The right hand model is our model that we have been using. I have mapped each of the joints to the pertaining joint name on our model. The first issue we are having seems to be based around the placement of the forearm. It attaches itself at the wrist. The second issue seems to be around rotation. Our team is looking for some guidance on what needs to change in order to map this model correctly. Thanks in advance!

At the moment the map kit APls only support non-volumetric maps (i.e. in a window or in a volume, but on a 2D surface). Is support for 3D volumetric maps in VisionOS in the works? And if so when can we expect it to be available?

Hello, I'm adding a CollisionComponent to an entity in RealityView. CollisionComponent requires that a Mesh must be provided as a reference for collision detection. However, in order to achieve more accurate detection, I hope that this Mesh resource is a geometric shape of a USDZ model. Is there any way to make it happen? Thank you!

As far as I know, Apple hasn’t opened access to the Vision Pro camera for developers yet, so I’m trying to find possible workarounds within the current capabilities. I’m wondering if there’s any way to apply a mesh to a person in the scene in Vision Pro, or if there’s an alternative approach to roughly detect a human shape in front of the user?

I've tried following apple's documentation to apply a video material on a Model Entity, but I have encountered a compile error while attempting to specify the Spatial Audio type. It is a 360 video on a Sphere which plays just fine, but the audio is too quiet compared to the volume I get when I preview the video on Xcode. So I tried tried to configure audio playback mode on the material but it gives me a compile error: "audioInputMode' is unavailable in visionOS audioInputMode' has been explicitly marked unavailable here RealityFoundation.VideoPlaybackController.audioInputMode)" https://developer.apple.com/documentation/realitykit/videomaterial/ Code: let player = AVPlayer(url: url) // Instantiate and configure the video material. let material = VideoMaterial(avPlayer: player) // Configure audio playback mode. material.controller.audioInputMode = .spatial // this line won’t compile. VisionOS 2.4, Xcode 16.4, also tried Xcode 26 beta 2. The videos are HEVC MPEG-4 codecs. Is there any other way to do this, or is there a workaround available? Thank you.

Hey everyone, I'm working on an object viewer where users can place objects in a real room using AR, and I want both visionOS (Apple Vision Pro) and iOS devices (iPad, iPhone) to participate in the same shared spatial experience. The idea is that a user with a Vision Pro can place an object, and peers using iPhones/iPads can see the same object in the same position in their AR view. I've looked into ARKit's Shared ARWorldMap and MultipeerConnectivity, but I'm not sure if this extends seamlessly to visionOS or if Apple has an official way to sync spatial data between visionOS and iOS devices. Has anyone tried sharing a spatial world between visionOS and iOS? Are there any built-in frameworks that allow for a shared multiuser AR session across these devices? If not, what would be the best way to sync object positions between them? Would love to hear if anyone has insights or experience with this! 🚀 Thanks!

I sketched a idea for a project in Reality Composer on my iPad, thinking when I had a chance to sit down I would work it up in Xcode. However, when I got back to my computer, I discovered I cannot open a file created in Reality Composer (or the exported Reality file) in Reality Composer Pro. Am I missing something obvious here, because this seems like a huge oversight. If anyone, can let me know how to open a file created in Reality Composer in Reality Composer Pro, I would greatly appreciate it. Partly, because there seems to be objects available in Reality Composer that are not in Reality Composer Pro. Thanks Stan

A ShaderGraphMaterial with an Occlusion Surface Output generated with RealityComposer 2 fails to load on iOS 18 and macOS 15 with the following error: RealityFoundation.ShaderGraphMaterial.LoadError.invalidTypeFound (https://developer.apple.com/documentation/realitykit/shadergraphmaterial/loaderror/invalidtypefound) This happens with both https://developer.apple.com/documentation/shadergraph/realitykit/occlusion-surface-(realitykit) and https://developer.apple.com/documentation/shadergraph/realitykit/shadow-receiving-occlusion-surface-(realitykit) RealityView { content in do { let bgEntity = ModelEntity(mesh: .generateCone(height: 0.5, radius: 0.1), materials: [SimpleMaterial(color: .red, isMetallic: true)]) bgEntity.position.z = -0.2 content.add(bgEntity) let occlusionMaterial = try await ShaderGraphMaterial(named: "/Root/OcclusionMaterial", from: "OcclusionMaterial") let testEntity = ModelEntity(mesh: .generateSphere(radius: 0.4), materials: [occlusionMaterial]) content.add(testEntity) content.cameraTarget = testEntity } catch { print("Shader Graph Load Error:") dump(error) } } .realityViewCameraControls(.orbit) .edgesIgnoringSafeArea(.all) Feedback ID: FB15081296

Hi, I'm trying to correct the lens distortion in frames provided by Enterprise API camera frame provider. The frames provided seem to have only in/extrinsics info, but not the distortion lookup table. Is there some magic setting, or function to do that (I can't seem to find anything like this)? Or is there a way to use AVCameraCalibrationData together with provider?

Hi, I'm working with CameraFrameProvider from Enterprise API. Is it always capped at 30fps, or is there something I can switch to get more? I assume it is capped at 30, so let me cram in additional question here :). If I'd get a developer strap and attach an external camera capable of doing >30fps, will I get the full stream, or some other limitation will kick in?

Hello, Let me ask you a question about Apple Immersive Video. https://www.apple.com/newsroom/2024/07/new-apple-immersive-video-series-and-films-premiere-on-vision-pro/ I am currently considering implementing a feature to play Apple Immersive Video as a background scene in the app I developed, using 3DCG-created content converted into Apple Immersive Video format. First, I would like to know if it is possible to integrate Apple Immersive Video into an app. Could you provide information about the required software and the integration process for incorporating Apple Immersive Video into an app? It would be great if you could also share any helpful website resources. I am considering creating Apple Immersive Video content and would like to know about the necessary equipment and software for producing both live-action footage and 3DCG animation videos. As I mentioned earlier, I’m planning to play Apple Immersive Video as a background in the app. In doing so, I would also like to place some 3D models as RealityKit entities and spatial audio elements. I’m also planning to develop the visionOS app as a Full Space Mixed experience. Is it possible to have an immersive viewing experience with Apple Immersive Video in Full Space Mixed mode? Does Apple Immersive Video support Full Space Mixed? I’ve asked several questions, and that’s all for now. Thank you in advance!

Previously I had developed software using SMI eye trackers, both screen mounted and their mobile glasses, for unique therapeutic and physiology applications. Sadly, after SMI was bought by Apple, their hardware and software have been taken off the market and now it is very difficult to get secondhand-market systems. The Apple Vision Pro integrates the SMI hardware. While I can use ARKit to get gaze position, I do not see a way to access information that was previously made accessible on the SMI hardware, particularly: dwell time and pupil diameter information. I am hopeful (or asking) to see that if a user has a properly set up Optic ID and would opt-in if, either on the present or a future version of visionOS, it might be possible to get access to the data streams for dwell times and pupil diameter. Pupil diameter is particularly important as it is a very good physiological measure of how much stress a person is encountering, which is critical to some of the therapeutic applications that formerly we used SMI hardware. Any ideas, or, if this is not possible, proposing this to the visionOS team would be appreciated!