In MetricKit, a metric payload comes in with a time range which usually means it contains multiple launches/sessions. How can we relate things that will change between launches or sessions such as pid and lowPowerModeEnabled from the metadata. Will there be multiple payloads for each unique value or is there some other way to use this?

Background: During daily usage of iOS devices, devices experience noticeable thermal issues. This heating not only affects user experience, but may also lead to device performance throttling, shortened battery life, and other problems. We need better understanding and monitoring of device thermal states to optimize application performance and user experience. Issues Encountered: Insufficient thermal monitoring capabilities: Unable to obtain real-time accurate temperature data from devices Difficult power consumption analysis: Hard to determine which specific modules or threads cause high power consumption and heating Requested Solutions: Temperature Monitoring API: Provide accessible device temperature reading interfaces Thermal Attribution Analysis Capability: During heating events, we expect to receive more detailed power consumption monitoring data, such as CPU, GPU, network, location services, display, high power consumption thread stacks and other information to help developers identify high energy consumption operations

In recent versions, the increase in background abnormal exits is significant. According to monitoring data, it is closely related to the iOS 26 system. Could you please look into the reasons or provide some suggestions for troubleshooting the issue?

As the title suggests, I have a class marked with @Observable. Within the class I have multiple var's. When one of my var's changes (formation), I want to run an updateOrCreateContent(). I had thought I could just do this with a bit of combine, but I'm struggling to get it working... The code below has a compile error at $formation When I mark formation @Published, it generates a different compile error: "Invalid redeclaration of synthesized property '_formation'" any help appreciated thanks class LayoutModel { var players: [Player] = [] var formation: Formation = .f433 var cancellables = Set<AnyCancellable>() init(players: [Player], formation: Formation) { self.players = players self.formation = formation updateOrCreateContent() $formation.sink(receiveValue: { _ in self.updateOrCreateContent() }) .store(in: &cancellables) }

Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?

Summary I'm using Background Assets to download Apple-hosted Asset Packs(downloadPolicy = onDemand). The first download cancellation succeeds, but on the second and subsequent downloads, progress.cancel() fails to work and the download completes to the end. Environment iOS 26.0 – 26.3 RC (all produce the same result) Xcode Version 26.2 (17C52) Using Apple-hosted Asset Packs Steps to Reproduce Start downloading an Asset Pack Call progress.cancel() during download → Succeeds Start downloading the same Asset Pack again Call progress.cancel() during download → Fails (download completes to the end) Observed Error Logs After 1st cancellation: A download with the ID "X-XXXXXXXX-XXX" failed: Error Domain=NSURLErrorDomain Code=-999 "cancelled" ↑ This is expected (cancellation succeeded) The fact that version 0 of the asset pack with the ID "X-XXXXXX-XXX" finished being downloaded couldn't be reported: Error Domain=NSCocoaErrorDomain Code=3851 "Property list invalid for format: 200 (property lists cannot contain objects of type 'CFError')" ↑ Problem: Unable to serialize CFError to plist 2nd cancellation attempt: The download with the ID "X-XXXXXX-XXX" couldn't be canceled: Error Domain=BAErrorDomain Code=113 "The requested download operation failed because the download object did not exist." ↑ The download object we're trying to cancel supposedly doesn't exist Implementation Code // Cancel implementation func cancel(tag: String) async { let statusUpdates = AssetPackManager.shared.statusUpdates(forAssetPackWithID: tag) for await statusUpdate in statusUpdates { if case .downloading(_, let progress) = statusUpdate, progress.isCancellable { progress.cancel() } } } Analysis It appears that when the first cancellation occurs, the system internally tries to save the cancellation state to a plist, but fails to serialize the CFError object. This seems to cause an inconsistent internal state, preventing the system from correctly recognizing the download object on subsequent downloads. Questions Is there a workaround? Is there a planned fix for a future iOS version?

We put the apple-app-site-association file at https://ourdomain.com.tr/.well-known/apple-app-site-association. When we send a request to url, we get 200 response code every time and we can see the file. But sometimes when we try to access https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.tr url with browser or CMD tool, we are facing with 404 response code. There isn't any ip adress filter in our systems and we tried using vpn for sending same request from different locations(america and europe) but nothing changed. In addition, can anyone provide the ip list of apple cdn servers to check the F5 Load balancer WAF logs? CMD output: C:\Users\Name>curl -Lv https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.tr Host app-site-association.cdn-apple.com:443 was resolved. IPv6: (none) IPv4: 17.253.122.197, 17.253.15.210, 17.253.122.196, 17.253.107.201, 17.253.57.203, 17.253.15.198, 17.253.57.200 Trying 17.253.122.197:443... Connected to app-site-association.cdn-apple.com (17.253.122.197) port 443 schannel: disabled automatic use of client certificate ALPN: curl offers http/1.1 ALPN: server accepted http/1.1 using HTTP/1.x GET /a/v1/ourdomain.com HTTP/1.1 Host: app-site-association.cdn-apple.com User-Agent: curl/8.9.1 Accept: / Request completely sent off schannel: remote party requests renegotiation schannel: renegotiating SSL/TLS connection schannel: SSL/TLS connection renegotiated < HTTP/1.1 404 Not Found < Apple-Failure-Details: {"cause":"context deadline exceeded (Client.Timeout exceeded while awaiting headers)"} < Apple-Failure-Reason: SWCERR00301 Timeout < Apple-From: https://ourdomain.com.tr/.well-known/apple-app-site-association < Apple-Try-Direct: true < Cache-Control: max-age=3600,public < Content-Length: 10 < Content-Type: text/plain; charset=utf-8 < Date: Mon, 14 Apr 2025 12:52:04 GMT < Expires: Mon, 14 Apr 2025 12:52:14 GMT < Age: 1770 < Via: http/1.1 uklon5-vp-vst-004.ts.apple.com (acdn/268.14469), https/1.1 uklon5-vp-vfe-002.ts.apple.com (acdn/268.14469), http/1.1 frmrs1-edge-mx-008.ts.apple.com (acdn/268.14469), http/1.1 frmrs1-edge-fx-005.ts.apple.com (acdn/268.14469) < X-Cache: hit-fresh, hit-stale, hit-fresh, hit-fresh < CDNUUID: 9e72cf99-1503-4644-9ea3-173328a25c94-31496306226 < Connection: keep-alive < Not Found Connection #0 to host app-site-association.cdn-apple.com left intact

App is repeatedly rejected under Guideline 2.5.1 for referencing the private API:_SecCertificateIsValid Reported custom framework CommonLibrary.framework. The SDK is written in Objective-C and uses only public Security APIs. It does not use any deprecated APIs. We have verified the framework binary using nm, otool, and strings, and _SecCertificateIsValid does not appear in exported or hidden symbols. Bitcode is disabled, dead-code stripping is enabled, and the Release build uses -Os. Despite this, App Store Connect continues to detect _SecCertificateIsValid. We have attached herewith screenshots of our analysis for the reference. Can Apple’s server-side analysis or Security.framework internals still surface _SecCertificateIsValid? Is there a recommended way for SDK authors to prevent this symbol from being flagged?

I'm currently using Swift to write an independent Apple Watch app for watchOS 7+. My app uses Location Services, and in case the user doesn't allow that at first, I'd like to have a button inside my watchOS app to send my user to the part of the Settings app (inside watchOS) where he can give the appropriate permissions for the app. I know that in iOS/macOS you can use the openSettingsURLString string from UIApplication to do what I want, but it's not available in watchOS and I haven't found any equivalent resource inside the WKExtension class (normally the equivalent for UIApplication in the watchOS environment). Does anyone know if there's any way to programatically open the Apple Watch Settings app from my watchOS app? I'm asking since as far as I understand asking for Location permissions again would not work since the user has already refused to allow the permissions before, making the authorization status "denied". I understand as well that there's the possibility of showing a modal and directing the user to go to Settings and allow the use of location services (as in "Please go to Settings > Privacy > Location Services > [AppName] to allow the use of location services") but I'd like if I could direct the user there instead as one might do in iOS. The code below is what I'm trying to do - but (of course) it crashes since I'm not actually passing any system URL. .alert(isPresented: $alertVisible) { Alert (title: Text("Please allow our app to use location services in order to get Weather Data"), message: Text("Go to Settings?"), primaryButton: .default(Text("Settings"), action: { WKExtension.shared().openSystemURL(URL(string: "")!) //UIApplication.shared.open(URL(string: UIApplication.openSettingsURLString)!) }),

Hello, We are using a Message Filter Extension (ILMessageFilterExtension) to classify SMS/iMessage content (junk vs allow) in our app. After testing on iOS 26.1, we want to confirm whether there are any behavioral, performance, or API-level changes that impact message filtering, such as: Changes in how often the filter extension is invoked Differences in classification accuracy or system overrides New privacy, entitlement, or permission-related restrictions Execution time limits or memory constraints Any changes specific to iMessage vs SMS filtering We did not find any explicit mention of Message Filter Extensions in the iOS 26.1 release notes and would like to confirm whether the existing behavior from previous iOS versions remains unchanged. Has Apple introduced any known or undocumented changes in iOS 26.1 that developers should be aware of when supporting Message Filter Extensions? Sometime I also found unpredictable behaviour on iOS version 18.5 or below, like sometime it works but sometimes starts working. Thanks in advance for any guidance.

Hello I'm using this sdk DeclaredAgeRange to get the user age range When I'm doing in debug mode using sandbox account it is working as expected and I can get the user age range But when I tried in TestFlight build using sandbox account it is not working and it is always return the age range 18+ and also isEligibleForAgeFeatures API is always returning false Any advise on this?

When Live Caller ID first came out I experimented with it and got it working using the Example PIR database. All my links from that time are now out of date and no longer work, however I seem to have found where the PIR database example and documentation has moved to (https://swiftpackageindex.com/apple/pir-service-example/main/documentation/pirservice/testinginstructionslivecalleridlookup) But what I can't find is an exact definition of the the logo size/max size/dimensions/format should be. My memory from that time is that it was very pernickety, and if things weren't exactly right, the logo wasn't displayed. I can remember the format had to be HEIC to get it to work. Looking through the documentation however, I can't see exact requirements specified. My question is - for the Live Caller ID logo what are the exact image requirements, and where are they documented?

Hello, We are using a Message Filter Extension (ILMessageFilterExtension) to classify SMS/iMessage content (junk vs allow) in our app. After testing on iOS 26.1, we want to confirm whether there are any behavioral, performance, or API-level changes that impact message filtering, such as: Changes in how often the filter extension is invoked Differences in classification accuracy or system overrides New privacy, entitlement, or permission-related restrictions Execution time limits or memory constraints Any changes specific to iMessage vs SMS filtering We did not find any explicit mention of Message Filter Extensions in the iOS 26.1 release notes and would like to confirm whether the existing behavior from previous iOS versions remains unchanged. Has Apple introduced any known or undocumented changes in iOS 26.1 that developers should be aware of when supporting Message Filter Extensions? Sometime I also found unpredictable behaviour on iOS version 18.5 or below, like sometime it works but sometimes starts working. Thanks in advance for any guidance.

Hello, We are using a Message Filter Extension (ILMessageFilterExtension) to classify SMS/iMessage content (junk vs allow) in our app. After testing on iOS 26.1, we want to confirm whether there are any behavioral, performance, or API-level changes that impact message filtering, such as: Changes in how often the filter extension is invoked Differences in classification accuracy or system overrides New privacy, entitlement, or permission-related restrictions Execution time limits or memory constraints Any changes specific to iMessage vs SMS filtering We did not find any explicit mention of Message Filter Extensions in the iOS 26.1 release notes and would like to confirm whether the existing behavior from previous iOS versions remains unchanged. Has Apple introduced any known or undocumented changes in iOS 26.1 that developers should be aware of when supporting Message Filter Extensions? Sometime I also found unpredictable behaviour on iOS version 18.5 or below, like sometime it works but sometimes starts working. Thanks in advance for any guidance.

Hello, I am developing an internal phone application using CallKit. I am experiencing an issue with the behavior of remoteHandle settings in iOS 26 and would appreciate any insights you can provide towards a solution. 1. Problem Description When an iPhone running iOS 26 is in a sleep state and receives a VoIP incoming call where remoteHandle is set to nil or an empty string (@""), we are unable to transition to our application (the UIExtension provided by the provider) from the CallKit UI's "More" (…) button after answering the call. 2. Conditions and Symptoms OS Version: iOS 26 Initial State: iPhone is in a sleep state Call Type: An unsolicited(unknown number) VoIP incoming call where the CXCallUpdate's remoteHandle is set to either nil or [[CXHandle alloc] initWithType:CXHandleTypePhoneNumber value:@""] Symptoms: After answering the VoIP call by sliding the button, selecting the "More" (…) button displayed on the CallKit screen does not launch our application's UIExtension (custom UI), and the iPhone instead stay to the CallKit screen. 3. Previous Behavior (Up to iOS 18) Up to iOS 18, even when remoteHandle was set to an empty string using the following code, the application would transition normally from "More" after answering an incoming call from a sleep state. CXCallUpdate *update = [[CXCallUpdate alloc] init]; update.remoteHandle = [[CXHandle alloc] initWithType:CXHandleTypePhoneNumber value:@""]; [provider reportNewIncomingCallWithUUID:uuid update:update completion:completion]; 4. Unsuccessful Attempts to Resolve The issue remained unresolved after changing the handling for unsolicited(unknown number) incoming calls as follows: CXCallUpdate *update = [[CXCallUpdate alloc] init]; update.remoteHandle = nil; // Set remoteHandle to nil [provider reportNewIncomingCallWithUUID:uuid update:update completion:completion]; 5. Workaround (Temporary) The problem can be resolved, and the application can transition successfully, by setting a dummy numerical value (e.g., "0") for the value in remoteHandle using the following code: CXCallUpdate *update = [[CXCallUpdate alloc] init]; update.remoteHandle = [[CXHandle alloc] initWithType:CXHandleTypePhoneNumber value:@"0"]; // Set a dummy numerical value [provider reportNewIncomingCallWithUUID:uuid update:update completion:completion]; 6. Additional Information If remoteHandle is correctly set with the caller's number (i.e., not an unsolicited(unknown number) call; e.g., value:@"1234567890"), the application transitions normally from the "More" button after answering an incoming call from a sleep state, even in iOS 26. The above issue does not occur when answering incoming calls while the iPhone is in an active state (not sleeping). 7. Questions Have there been any other reports of similar behavior? Should this be considered a bug in CallKit for iOS 26? Should I make file a new Feedback report? Is there a suitable method to resolve this issue when the caller ID is unsolicited (nil or an empty string)? This problem significantly impacts user operations as end-users are unable to perform essential in-app actions such as hold or transfer after answering an unsolicited(unknown number) call from a sleep state. We are eager to find an urgent solution and would appreciate any information or advice you can provide. Thank you for your assistance.

Hi DTS / Apple engineers, We’re attempting to extending our screen time app target to Mac Catalyst. On iOS, FamilyControls works as expected (AuthorizationCenter + FamilyActivityPicker, then ManagedSettings shields + DeviceActivity monitoring/reporting). On Mac Catalyst: The project builds with FamilyControls/DeviceActivity/ManagedSettings capabilities enabled. But attempting to request FamilyControls authorization (or present FamilyActivityPicker) fails at runtime. We see errors similar to: Failed to get service proxy: The connection to service named com.apple.FamilyControlsAgent was invalidated: failed at lookup with error 159 - Sandbox restriction. And our app stays authorizationStatus == .notDetermined, with the request failing. We saw an Apple engineer suggestion to “disable App Sandbox”, but Mac Catalyst apps appear to always be sandboxed, so we can’t disable it. Questions: Is FamilyControls authorization supported on Mac Catalyst today? If so, what entitlement/capability is required specifically for Catalyst/macOS? If FamilyControls auth cannot succeed on Catalyst, does that mean ManagedSettings shields and DeviceActivity monitoring/reporting are effectively unusable on Catalyst (since they depend on that authorization)? Is there an Apple‑recommended approach for a Catalyst “portal” app that mirrors an iOS child device’s restrictions, or is local enforcement on Catalyst intentionally unsupported? Any guidance (and any official docs that clarify current platform support) would be hugely appreciated.

I've tried pass different value like 13,16,18, but I don't see any difference..? could anyone tell what could happen differently if I pass a different value here?

Subject: iOS Fails to Fetch AASA File for Internationalized Domain Names (IDN) in Unicode or Punycode Format Dear Apple Developer Relations Team And Community Members, We are reporting a critical bug in the iOS Associated Domains feature that prevents Universal Links from working for apps using Internationalized Domain Names (IDN). Problem Description: The iOS operating system does not attempt to download the apple-app-site-association (AASA) file for domains containing non-ASCII characters (e.g., diacritics, Cyrillic). This failure occurs regardless of whether the domain is specified in the app's entitlements in its human-readable Unicode format (e.g., montréal.ca) or its encoded Punycode format (e.g., xn--montral-fya.ca, xn--e1afka0abm4b.xn--p1ai). Without fetching and validating this file, Universal Links are not activated, and the system fails to establish a connection between the website and our app. Steps to Reproduce: Create an app with the Associated Domains entitlement enabled. Add an IDN to the entitlement. We tested both formats: Format A (Unicode): applinks://montréal.ca Format B (Punycode): applinks://xn--montral-fya.ca Host a valid AASA file on our server at the correct, accessible well-known URLs for both domain representations: For montréal.ca: https://montréal.ca/.well-known/apple-app-site-association and https://xn--montral-fya.ca/.well-known/apple-app-site-association Install the app on a device running the latest iOS version. Monitor network traffic using a tool like Charles Proxy. Observed Result: No HTTP GET request is made to any of the AASA URLs for the domains montréal.ca (in either Unicode or Punycode format) upon app installation. The system does not initiate the domain validation process. In contrast, for a standard ASCII domain (e.g., applinks://example.com), the AASA fetch is triggered immediately and is observed in the network log. Expected Result: iOS should correctly resolve the Internationalized Domain Name (whether specified in Unicode or Punycode format in the entitlement) and perform an HTTP GET request to fetch the AASA file from the /.well-known path, identical to its behavior for ASCII domains. Evidence & Configuration: Our server is configured correctly: SSL certificates are valid, the AASA file is served with the correct application/json MIME type, and is directly accessible via a browser or curl. The AASA file's syntax has been validated and is correct. The issue is reproducible on the latest versions of iOS. Impact: This bug blocks a core platform feature for millions of users in regions that use non-Latin scripts (e.g., France, Russia, China, Arab states). It makes it impossible to use Universal Links with our primary domains, severely degrading the user experience and forcing us to seek suboptimal workarounds like registering separate ASCII domains. Request: We kindly request that you investigate and log this issue as a bug in iOS and forward it to the appropriate engineering team for a fix in an upcoming update. We are prepared to provide any additional information, demo projects, or server access to assist in diagnostics. Thank you for your attention to this serious matter.

Hello Apple Developer Community, I'm working on implementing App Clips for a restaurant platform and need guidance on configuring custom App Clip experiences using URL redirects. Context: We have multiple restaurant locations, each needing branded App Clip cards (custom image, title, subtitle). With hundreds of tables across many venues, creating individual App Clip experiences for each table in App Store Connect isn't scalable. Currently: Using a single, generic App Clip experience for all locations => https://example.com Desired Flow: Customer scans QR code at restaurant table ↓ https://example.com/123 ↓ iOS fetches URL ↓ Server responds with 302 redirect ↓ https://example.com/brands/le-pain-quotidien?venue=abc123 ↓ iOS displays App Clip card with "Le Pain Quotidien" branding ↓ User taps "Open" → App Clip launches with correct context What I've Tried: Configured multiple App Clip experiences in App Store Connect Implemented 302 redirects from short URLs to branded URLs Tested various redirect configurations without success Questions: Does iOS fetch and follow redirects before displaying the App Clip card, or does it only use the originally scanned URL? What App Clip experience URLs should be configured in App Store Connect for this redirect scenario? Are there specific HTTP headers or redirect requirements for iOS to properly recognize the final destination? Should the App Clip experience be registered for example.com/123 or example.com/brands/le-pain-quotidien? Reference: Apple's documentation suggests this is possible: https://developer.apple.com/documentation/AppClip/configuring-the-launch-experience-of-your-app-clip#Use-short-URLs-or-redirects Has anyone successfully implemented custom App Clip cards using URL redirects? Any guidance on the correct configuration approach would be greatly appreciated. Thank you!

Environment: Xcode 26 iOS 26 Also tested on iOS 18 (working correctly) Description: I'm experiencing a behavior change with URL(fileURLWithPath:) when the filename starts with a tilde (~) character. On iOS 18, passing a filename like ~MyFile.txt to URL(fileURLWithPath:) treats the tilde as a literal character. However, on iOS 26, the same code resolves the tilde as the home directory, resulting in unexpected output. Minimal Example: let filename = "~MyFile.txt" let url = URL(fileURLWithPath: filename) print(url.lastPathComponent) Expected Result (iOS 18): ~MyFile.txt Actual Result (iOS 26): 924AF0C4-C3CD-417A-9D5F-733FBB8FCF29 The tilde is being resolved to the app's container directory, and lastPathComponent returns the container UUID instead of the filename. Questions: 1. Is this an intentional behavior change in iOS 26? 2. Is there documentation about this change? 3. What is the recommended approach for extracting filename components when the filename may contain special characters like ~? Workaround: Using NSString.lastPathComponent works correctly on both iOS versions: let filename = "~MyFile.txt" let result = (filename as NSString).lastPathComponent // Returns: "~MyFile.txt" ✅ Is this the recommended approach going forward?