In the WWDC 2019 session "Extended Runtime for WatchOS apps" the video talks about an entitlement being required to use the HR sensor judiciously in the background. It provides a link to request the entitlement which no longer works: http://developer.apple.com/contect/request/health-monitoring The session video is also quite hard to find these days. Does anyone know why this is the case? Is the API and entitlement still available? Is there a supported way to run, even periodically, in the background on the Watch app (ignoring the background observer route which is known to be unreliable) and access existing HR sensor data

Hi, I am submitting auto-renewable subscriptions for the first time for a brand new iOS app (never approved before). Setup: App ID has In-App Purchase capability enabled Subscriptions created under a subscription group All metadata (pricing, localization, availability) completed Subscriptions currently show In Review Testing via TestFlight build Bundle ID matches App Store Connect Using react-native-iap (StoreKit under the hood) When calling: await getSubscriptions({ skus }) I consistently get: products fetched: 0 ProductsUnavailableError Also, the app version page does not show the “In-App Purchases and Subscriptions” section. Question: For a brand new app, will StoreKit return empty products while the first subscriptions are in review? Do the first subscriptions need to be approved and/or attached to a new app version before they become available in TestFlight sandbox? Thanks for any clarification.

Description: I am developing a digital well-being application using the Screen Time API (FamilyControls, ManagedSettings, and DeviceActivity). I am encountering a critical issue where the ApplicationToken provided by the system to my app extensions suddenly changes, causing a mismatch with the tokens originally stored by the main application. The Problem: When a user selects applications via FamilyActivityPicker, we persist the FamilyActivitySelection (and the underlying ApplicationToken objects) in a shared App Group container. However, we are seeing frequent cases where the token passed into: ShieldConfigurationDataSource.configuration(shielding:in:) ShieldActionDelegate.handle(action:for:completionHandler:) ...does not match (using ==) any of the tokens previously selected and stored. IOS version: 26.2.1

While the recent news says "Developers who are distributing apps in Brazil can use the updated Declared Age Range API to obtain a user’s age category.", the guidance in the API did not mention Brazil. Can we confirm that Should all iOS developers follow that guidance for Brazil compliance? Will IsEligibleForAgeFeatures return true for in scope users in Brazil? (We don't have any explicit confirmation on this, and we cannot test if this is the case today in sandbox)

Hi! We’ve had Live Caller ID Lookup in production for a while. We’re seeing backend RPS on our /queries endpoint much higher than our expected incoming call volume. While testing with Console.app during an incoming call, it looks like iOS may still hit our service even when the caller number is already in the user’s Contacts - but I’m not 100% sure from logs alone. Can you confirm: Does iOS invoke Live Caller ID Lookup (i.e. call /queries) for every incoming call, including calls from saved Contacts? If yes, is this simply expected framework behavior? Thanks!

From the Feb 24 news, I understand that for all Apple users in Brazil with iOS26.2 and newer, isEligibleForAgeFeatures will eventually return true. Brazil is a "nonregulated region", and developers will need to handle all three situations of ask first/always share/never share. Please correct me if I'm wrong above. A few questions follow on the eligibility check: What's the return value of IsEligibleForAgeFeatures for a Brazilian user who has NOT touched the age range feature at all, thus hasn't picked one of the three options? How can we test these cases? From the updated sandbox doc, there's more information on declined/approved, will those the same behaviors as a future Brazilian user? The doc used to say Texas, now it doesn't say any region. On which date will Apple START to return true for IsEligibleForAgeFeatures for Brazilian users? I cannot find the exact date anywhere. Will ALL of Brazil return true overnight, or is there some ramp up that developers need to be aware of? Thanks a lot for sharing the guidance, and thanks in advance for more guidance to come!

Problem description Since macOS Sequoia, our users have experienced issues with multicast traffic in our macOS app. Regularly, the app starts but cannot receive multicast, or multicast eventually stops mid-execution. The app sometimes asks again for Local Network permission, while it was already allowed so. Several versions of our app on a single machine are sometimes (but not always) shown as different instances in the System Settings > Privacy & Security > Local Network list. And when several instances are shown in that list, disabling one disables all of them, but it does not actually forbids the app from receiving multicast traffic. All of those issues are experienced by an increasing number of users after they update their system from macOS 14 to macOS 15 or 26, and many of them have reported networking issues during production-critical moments. We haven't been able to find the root cause of those issues, so we built a simple test app, called "FM Mac App Test", that can reproduce multicast issues. This app creates a GCDAsyncUdpSocket socket to receive multicast packets from a piece of hardware we also develop, and displays a simple UI showing if such packets are received. The app is entitled with "Custom Network Protocol", is built against x86_64 and arm64, and is archived (signed and notarized). We can share the source code if requested. Out of the many issues our main app exhibits, the test app showcases some: The app asks several times for Local Network permission, even after being allowed so previously. After allowing the app's Local Network and rebooting the machine, the System Settings > Privacy & Security > Local Network does not show the app, and the app asks again for Local Network access. The app shows a different Local Network Usage Description than in the project's plist. Several versions of the app appear as different instances in the Privacy list, and behave strangely. Toggling on or off one instance toggles the others. Only one version of the app seems affected by the setting, the other versions always seem to have access to Local Network even when the toggle is set to off. We even did see messages from different app versions in different user accounts. This seems to contradicts Apple's documentation that states user accounts have independent Privacy settings. Can you help us understand what we are missing (in terms of build settings, entitlements, proper archiving...) so our app conforms to what macOS expects for proper Local Network behavior? Related material Local Network Privacy breaks Application: this issue seemed related to ours, but the fix was to ensure different versions of the app have different UUIDs. We ensured that ourselves, to no improvement. Local Network FAQ Technote TN3179 Steps to Reproduce Test App is developed on Xcode 15.4 (15F31d) on macOS 14.5 (23F79), and runs on macOS 26.0.1 (25A362). We can share the source code if requested. On a clean install of macOS Tahoe (our test setup used macOS 26.0.1 on a Mac mini M2 8GB), we upload the app (version 5.1). We run the app, make sure the selected NIC is the proper one, and open the multicast socket. The app asks us to allow Local Network, we allow it. The alert shows a different Local Network Usage Description than the one we set in our project's plist. The app properly shows packets are received from the console on our LAN. We check the list in System Settings > Privacy & Security > Local Network, it includes our app properly allowed. We then reboot the machine. After reboot, the same list does not show the app anymore. We run the app, it asks again about Local Network access (still with incorrect Usage Description). We allow it again, but no console packet is received yet. Only after closing and reopening the socket are the console packets received. After a 2nd reboot, the System Settings > Privacy & Security > Local Network list shows correctly the app. The app seems to now run fine. We then upload an updated version of the same app (5.2), also built and notarized. The 2nd version is simulating when we send different versions of our main app to our users. The updated version has a different UUID than the 1st version. The updated version also asks for Local Network access, this time with proper Usage Description. A 3rd updated version of the app (5.3, also with unique UUID) behaves the same. The System Settings > Privacy & Security > Local Network list shows three instances of the app. We toggle off one of the app, all of them toggle off. The 1st version of the app (5.1) does not have local network access anymore, but both 2nd and 3rd versions do, while their toggle button seems off. We toggle on one of the app, all of them toggle on. All 3 versions have local network access.

Unexpected behavior encountered when scanning NFC tags. Imagine a link shortener web service where users can create lots of different URLs that are hosted on the same domain eg, https://short.com/unique-path The service has optional App Clip capability -- users can select any of their links and have the service create an App Clip for the selected link(s). Users can encode their URLs into NFC tags and have their customers scan NFC tags. Let's take just two URLs for example: https://short.com/foo https://short.com/bar The /foo link does have an App Clip associated with it while /bar does not have it. Each link has been encoded into appropriate NFC tag. Expected behavior when scanning from an iPhone: /foo -- shows an App Clip popup. /bar -- shows a "Open in Safari" default notification. What's actually happening /foo -- opens App Clip poput with correct metadata (title, subtitle, image) which is totally expected behavior. /bar (the one that doesn't have app clip associated with it) -- opens an App-Clip-like popup with the following error: CPSErrorDomainError 2 (see attachment below) So for some reason when someone scans an NFC tag with a URL that is not an App Clip and never has been -- it always shows that error regardless whether the URL exists or does not exist. I've tried few different/random URLs (which don't have an App Clip associated with it) and all of them show the same error. Additional details: All links use the same domain and URL format: domain.com/path where path is a short string of random a-Z characters. All App Clips are created at the same iOS app. AASA is good: Cache and Debug -- both green. This issue has happened to lots of users on lots of different iPhones and iOS'. Since the issue's been happening to lots of different users on different iPhone(s)/iOS' no sysdiagnose is attached. Actually it works the same on every device/iOS we've tried. Before submitting the issue, I've found few other developers reporting the same issue. What's interesting though is none of the links I've went through comes with a definite answer and it seems like this issue just randomly comes and goes without any specific changes on the server and/or iOS app. Dropping the links of similar issues below. https://developer.apple.com/forums/thread/671433 https://developer.apple.com/forums/thread/665969 https://developer.apple.com/forums/thread/775316 https://developer.apple.com/forums/thread/764545

Background: My app uses a third-party SDK for payments, and it uses Original StoreKit internally for IAP payments. Now I'm getting ready to migrate to StoreKit2, and during the transition, users may use either method to initiate payments, and there's no way to avoid the coexistence of StoreKit2 and Original StoreKit. Problem: When a user has an unfinished transaction, if the app is restarted, both StoreKit2 and Original StoreKit will receive a notification of the transaction: Original StoreKit's '-paymentQueue:updatedTransactions:' method StoreKit2's 'Transaction.updated' method resulting in duplicate calls to the shipping API. My current treatment is to only add '-paymentQueue:updatedTransactions:' to listen for unfinished transactions. Even if the user is using StoreKit2 to initiate the payment, if the transaction is not Finished, it will be fetched via this method after restarting the app to process this transaction. Is this approach feasible and are there any best practices for this scenario? To summarize: Is it feasible to fetch unfinished StoreKit2 transactions via Original StoreKit methods when StoreKit2 coexists with Original StoreKit? Is there a recommended way

I haven’t been able to get this to work at any level! I’m running into multiple issues, any light shed on any of these would be nice: I can’t implement a bloom filter that produces the same output as can be found in the SimpleURLFilter sample project, after following the textual description of it that’s available in the documentation. No clue what my implementation is doing wrong, and because of the nature of hashing, there is no way to know. Specifically: The web is full of implementations of FNV-1a and MurmurHash3, and they all produce different hashes for the same input. Can we get the proper hashes for some sample strings, so we know which is the “correct” one? Similarly, different implementations use different encodings for the strings to hash. Which should we use here? The formulas for numberOfBits and numberOfHashes give Doubles and assign them to Ints. It seems we should do this conversing by rounding them, is this correct? Can we get a sample correct value for the combined hash, so we can verify our implementations against it? Or ignoring all of the above, can we have the actual code instead of a textual description of it? 😓 I managed to get Settings to register my first attempt at this extension in beta 1. Now, in beta 2, any other project (including the sample code) will redirect to Settings, show the Allow/Deny message box, I tap Allow, and then nothing happens. This must be a bug, right? Whenever I try to enable the only extension that Settings accepted (by setting its isEnabled to true), its status goes to .stopped and the error is, of course, .unknown. How do I debug this? While the extension is .stopped, ALL URL LOADS are blocked on the device. Is this to be expected? (shouldFailClosed is set to false) Is there any way to manually reload the bloom filter? My app ships blocklist updates with background push, so it would be wasteful to fetch the filter at a fixed interval. If so, can we opt out of the periodic fetch altogether? I initially believed the API to be near useless because I didn’t know of its “fuzzy matching” capabilities, which I’ve discovered by accident in a forum post. It’d be nice if those were documented somewhere! Thanks!!

I’m encountering a persistent issue with my Network Extension (specifically NEFilterDataProvider) and would really appreciate any insights. The extension generally works as expected, but after some time — especially after sleep/wake cycles or network changes — a global network outage occurs. During this state, no network traffic works: pings fail, browsers can’t load pages, etc. As soon as I stop the extension (by disabling it in System Preferences), the network immediately recovers. If I re-enable it, the outage returns instantly. I’ve also noticed that once this happens, the extension stops receiving callbacks like handleNewFlow(), and reinstalling the app or restarting the extension doesn’t help. The only thing that resolves the issue is rebooting the system. After reboot, the extension works fine again — until the problem reoccurs later. I asked AI about this behavior, and it suggested the possibility that the kernel might have marked the extension as untrusted, causing the system to intentionally block all network traffic as a safety mechanism. Has anyone experienced similar behavior with NEFilterDataProvider? Could there be a way to detect or prevent this state without rebooting? Is there any logging or diagnostic data I should collect when it happens again? Any guidance or pointers would be greatly appreciated. Thanks in advance!

I’d like to confirm the expected behavior of StoreKit 2 in the Sandbox environment regarding unfinished consumable transactions across devices. Scenario: Device A and Device B are signed in with the same Sandbox Apple ID A consumable in-app purchase is completed on Device A The transaction may be verified or unverified, but transaction.finish() is not called The app is then launched on Device B and listens for Transaction.updates Question: In this scenario, is it expected that Device B will or will not receive a callback for this unfinished consumable transaction? Or is it by design that unfinished consumable transactions are not guaranteed to be delivered across devices, regardless of verification state?

https://developer.apple.com/feedback-assistant/profiles-and-logs/ There is no iOS profile in this link.

Hi, I’m building an iOS self accountability app using FamilyControls and DeviceActivity. I can show the user’s real Screen Time correctly inside a DeviceActivityReport extension on a real device, but I want to use that same daily total inside the main app for today’s log and leaderboard. What I’m stuck on is getting that value back into the app. I tried App Groups, shared UserDefaults, a shared file in the app group container, and CFPreferences, but the report still only works as a display and the main app never receives the total. Is there any Apple supported way to use the daily Screen Time total from a DeviceActivityReport extension inside the containing app, or is this intentionally display only? Thanks.

I am writing a DriverKit driver for the first that uses the USBSerialDriverKit. The driver its purpose is to expose the device as serial interface (/dev/cu.tetra-pei0 or something like this). My problem: I don't see any logs from that driver in the console and I tried like 40 different approaches and checked everything. The last message I see is that the driver get successfully added to the system it is in the list of active and enabled system driver extensions but when I plug the device in none of my logs appear and it doesn't show up in ioreg. So without my driver the target device looks like this: +-o TETRA PEI interface@02120000 <class IOUSBHostDevice, id 0x10000297d, registered, matched, active, busy 0 (13 ms), retain 30> | { | "sessionID" = 268696051410 | "USBSpeed" = 3 | "UsbLinkSpeed" = 480000000 | "idProduct" = 36886 | "iManufacturer" = 1 | "bDeviceClass" = 0 | "IOPowerManagement" = {"PowerOverrideOn"=Yes,"DevicePowerState"=2,"CurrentPowerState"=2,"CapabilityFlags"=32768,"MaxPowerState"=2,"DriverPowerState"=0} | "bcdDevice" = 9238 | "bMaxPacketSize0" = 64 | "iProduct" = 2 | "iSerialNumber" = 0 | "bNumConfigurations" = 1 | "UsbDeviceSignature" = <ad0c16901624000000ff0000> | "USB Product Name" = "TETRA PEI interface" | "locationID" = 34734080 | "bDeviceSubClass" = 0 | "bcdUSB" = 512 | "USB Address" = 6 | "kUSBCurrentConfiguration" = 1 | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "UsbPowerSinkAllocation" = 500 | "bDeviceProtocol" = 0 | "USBPortType" = 0 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "USB Vendor Name" = "Motorola Solutions, Inc." | "Device Speed" = 2 | "idVendor" = 3245 | "kUSBProductString" = "TETRA PEI interface" | "kUSBAddress" = 6 | "kUSBVendorString" = "Motorola Solutions, Inc." | } | +-o AppleUSBHostCompositeDevice <class AppleUSBHostCompositeDevice, id 0x100002982, !registered, !matched, active, busy 0, retain 5> | { | "IOProbeScore" = 50000 | "CFBundleIdentifier" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOProviderClass" = "IOUSBHostDevice" | "IOClass" = "AppleUSBHostCompositeDevice" | "IOPersonalityPublisher" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "bDeviceSubClass" = 0 | "CFBundleIdentifierKernel" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOMatchedAtBoot" = Yes | "IOMatchCategory" = "IODefaultMatchCategory" | "IOPrimaryDriverTerminateOptions" = Yes | "bDeviceClass" = 0 | } | +-o lghub_agent <class AppleUSBHostDeviceUserClient, id 0x100002983, !registered, !matched, active, busy 0, retain 7> | { | "IOUserClientCreator" = "pid 1438, lghub_agent" | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@0 <class IOUSBHostInterface, id 0x100002986, registered, matched, active, busy 0 (5 ms), retain 9> | | { | | "USBPortType" = 0 | | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | | "USB Vendor Name" = "Motorola Solutions, Inc." | | "bcdDevice" = 9238 | | "USBSpeed" = 3 | | "idProduct" = 36886 | | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | | "bInterfaceSubClass" = 0 | | "bConfigurationValue" = 1 | | "locationID" = 34734080 | | "USB Product Name" = "TETRA PEI interface" | | "bInterfaceProtocol" = 0 | | "iInterface" = 0 | | "bAlternateSetting" = 0 | | "idVendor" = 3245 | | "bInterfaceNumber" = 0 | | "bInterfaceClass" = 255 | | "bNumEndpoints" = 2 | | } | | | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x100002988, !registered, !matched, active, busy 0, retain 6> | { | "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} | "IOUserClientCreator" = "pid 1438, lghub_agent" | "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@1 <class IOUSBHostInterface, id 0x100002987, registered, matched, active, busy 0 (5 ms), retain 9> | { | "USBPortType" = 0 | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "USB Vendor Name" = "Motorola Solutions, Inc." | "bcdDevice" = 9238 | "USBSpeed" = 3 | "idProduct" = 36886 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "bInterfaceSubClass" = 0 | "bConfigurationValue" = 1 | "locationID" = 34734080 | "USB Product Name" = "TETRA PEI interface" | "bInterfaceProtocol" = 0 | "iInterface" = 0 | "bAlternateSetting" = 0 | "idVendor" = 3245 | "bInterfaceNumber" = 1 | "bInterfaceClass" = 255 | "bNumEndpoints" = 2 | } | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x10000298a, !registered, !matched, active, busy 0, retain 6> { "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} "IOUserClientCreator" = "pid 1438, lghub_agent" "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} "IOUserClientDefaultLocking" = Yes } more details in my comment.

Since macOS 26.4 Beta 1, virtual HID devices created via DriverKit can no longer intercept key events from the built-in MacBook keyboard. External keyboards still work. This is confirmed and tracked here: https://github.com/pqrs-org/Karabiner-Elements/issues/4402 One possible lead (from LLM-assisted analysis of Apple's open-source IOHIDFamily code and cross-referencing community reports): macOS 26.4 Beta may have introduced or modified a security policy referred to as com.apple.iohid.protectedDeviceAccess, which could block IOHIDDeviceOpen for the Apple Internal Keyboard connected via SPI transport (AppleHIDTransportHIDDevice). This appears related to a "GamePolicy" check in IOHIDDeviceClass.m that gates whether processes can open HID devices. This has not been independently verified and may or may not be the root cause. This has far-reaching consequences. Karabiner-Elements alone has over 21,000 GitHub stars and is used by hundreds of thousands of macOS users for keyboard customization, accessibility workflows, ergonomic setups, and multilingual input. This change completely breaks its core functionality on any MacBook. Beyond Karabiner, this affects every developer building keyboard remapping, input customization, or accessibility tooling via DriverKit virtual HID devices — including commercial applications currently in development. I'd argue that the power and flexibility of keyboard customization on macOS is a genuine competitive advantage for the platform. Developers and power users choose Macs partly because tools like this exist. Restricting this capability would be detrimental to the ecosystem and to Apple's appeal among professional users. I'd like to understand: is this an intentional security change or a regression? If intentional, is there a migration path?

I have migrated my code to use SMAppService but am running into trouble deleting the old SMJobBless launchd registration using launchd remove. I am invoking this from a root shell when I detect the daemon and associated plist still exist, then also deleting those files. The remove seems to work (i.e. no errors returned) but launchd list shows the service is registered, with a status code of 28 I am using the same label for SMAppService as previously and suspect this is the reason for the problem. However, I am reluctant to change the label as there will a lot of code changes to do this. If I quit my application, disable the background job in System Settings and run sudo launchd remove in the Terminal then it is removed and my application runs as expected once the background job is re-enabled. Alternatively, a reboot seems to get things going. Any suggestions on to how I could do this more effectively welcome.

Hi everyone, I’m facing an issue with CloudKit sync getting stuck during initial device migration in my SwiftData-based app. The app follows a local-first architecture using SwiftData + CloudKit sync, and works correctly for: ✔ Incremental sync ✔ Bi-directional updates ✔ Small datasets However, when onboarding a new device with large historical data, sync becomes extremely slow or appears stuck. Even after two hours data is not fully synced. ~6900 Transactions 🚨 Problem When installing the app on a new iPhone and enabling iCloud sync: • Initial hydration starts • A small amount of data syncs • Then sync stalls indefinitely Observed behaviour: • iPhone → Mac sync works (new changes sync back) • Mac → iPhone large historical migration gets stuck • Reinstalling app / clearing container does not resolve issue • Sync never completes full migration This gives the impression that: CloudKit is trickling data but not progressing after a certain threshold. The architecture is: • SwiftData local store • Manual CloudKit sync layer • Local-first persistence • Background push/pull sync So I understand: ✔ Conflict resolution is custom ✔ Initial import may not be optimized by default But I expected CloudKit to eventually deliver all records. Instead, the new device remains permanently in a “partial state”. ⸻ 🔍 Observations • No fatal CloudKit errors • No rate-limit errors • No quota issues • iCloud is available • Sync state remains “Ready” • Hydration remains “mostlyReady” Meaning: CloudKit does not report failure — but data transfer halts. ⸻ 🤔 Questions Would appreciate guidance on: Is CloudKit designed to support large initial dataset migration via manual sync layers? Or is this a known limitation vs NSPersistentCloudKitContainer? ⸻ Does CloudKit internally throttle historical record fetches? Could it silently stall without error when record volume is high? ⸻ Is there any recommended strategy for: • Bulk initial migration • Progressive hydration • Forcing forward sync progress ⸻ Should initial migration be handled outside CloudKit (e.g. via file transfer / backup restore) before enabling sync? ⸻ 🎯 Goal I want to support: • Large historical onboarding • Multi-device sync • User-visible progress Without forcing migration to Core Data. ⸻ 🙏 Any advice on: • Best practices • Debugging approach • CloudKit behavior in such scenarios would be greatly appreciated. Thank you!

Our team is in the process of updating our apps to comply with Texas's new state law. In order to minimize user confusion and provide the most ideal flow to access the app as possible, we have a few questions we would like answered. Summary of questions: Is isEligibleForAgeFeatures intended to be accurate and accessible before the user has accepted the Age Range permissions prompt? As other US states and/or other countries adopt a similar law going forward, will this instance variable cover those locations? Will the runtime crashes on isEligibleForAgeFeatures and other symbols in the DeclaredAgeRange framework be addressed in a future RC or in the official release? Details and Investigations: With regards to isEligibleForAgeFeatures, our team has noticed that this value is always false before the age range prompt has been accepted. This has been tested on the XCode RC 26.2 (17C48). Assuming the request needs to be accepted first, isEligibleForAgeFeatures does not get updated immediately when the user chooses to share their age range (updated to true, when our sandbox test account is a Texas resident). Only upon subsequent relaunches of the app does this return a value that reflects the sandbox user's location. Is isEligibleForAgeFeatures intended to be accurate and accessible before the user has accepted the Age Range permissions prompt? This leads to our follow-up question to clarify whether isEligibleForAgeFeatures explicitly correlates to a user in an affected legal jurisdiction–if future US states and/or other countries adopt a similar law going forward, will this instance variable cover those locations? Can we also get confirmation about whether the runtime crash on isEligibleForAgeFeatures and other symbols in the DeclaredAgeRange framework will be addressed in a future RC or in the official release? Thank you.

The documentation for isEligibleForAgeFeatures states: Use this property to determine whether a person using your app is in an applicable region that requires additional age-related obligations for when you distribute apps on the App Store. But what does "region" mean? Is this going to return true if the user has downloaded the app from the US App Store? Or will it go further and geolocate the user and identify them as being within a particular relevant state within the US?