It's a great platform to grow your knowledge. Apple Teacher

We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

Hi, Is there a method to hide individual items in System Settings that is not Deprecated? It needs some of the settings set and hidden for the end user. I found the DisabledSystemSettings key however it is marked as Deprecated and does not include all the new items, especially those related to Apple Intelligence. Is there any method other than “Restrictions” that does not hide and only set individual settings ? It needs to hide items in system settings :)

I am using system_profiler command to check on the installed application list from mac device. **Terminal command to check installed java version - ** But while running /usr/sbin/system_profiler SPApplicationsDataType -xml , I cant able to find Java as an installed application. Is this a known issue or do we have any alternative workaround to fetch the same?

I am checking the response of DeviceInformation Command to collect network information from iPad. On iPad(iPad Pro 11, M4) devices that use WiFi without inserting Usim or Esim, network values ​​such as CurrentMCC and ICCID are received in response to the DeviceInformation command. cf.)Even though it may be garbage value, I blurred the unique information just in case. <key>ServiceSubscriptions</key> <array> <dict> <key>CarrierSettingsVersion</key> <string>61.0</string> <key>CurrentCarrierNetwork</key> <string></string> <key>CurrentMCC</key> <string>450</string> <key>CurrentMNC</key> <string>08</string> <key>EID</key> <string>blah blah</string> <key>ICCID</key> <string>blah balh</string> <key>IMEI</key> <string>blah blah</string> <key>IsDataPreferred</key> <true/> <key>IsRoaming</key> <true/> <key>IsVoicePreferred</key> <false/> <key>Label</key> <string>Provisioning</string> <key>LabelID</key> <string>00000000-0000-0000-0000-000000000000</string> <key>PhoneNumber</key> <string></string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> <key>SubscriberCarrierNetwork</key> <string>iPad</string> </dict> </array> This is a bit weird. If I collect the same information from an iPhone(iPhone 15 Pro Max) that only uses wifi and does not use Usim or Esim, it does not respond with values ​​like ICCID, CurrentMCC, etc. <key>ServiceSubscriptions</key> <array> <dict> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> </dict> <dict> <key>EID</key> <string>blah blah</string> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotTwo</string> </dict> </array> I'm confused by the network information collected. Is there a reason why the collected network information of iPad and iPhone are different?

I am trying to find clarification on something. We are seeing strange cases where customer devices seem to unenroll themselves after a period of MDM inactivity. This seems to tie into roughly when their identity certificate has expired. We can't confirm this because the device has since unenrolled. Is there any case where an Apple device will automatically unenroll if it's identity certificate has expired? This doesn't always seem to happen - I had a device respond immediately after being switched off for a year - but could this be down to some devices being DEP enrolled and others manually enrolled?

We are expering frequent delays recently when associating a device serial with the adamid of an app in our business manager account. I get an event id back when calling the /associate api but when i check the status of that event id is can be sat in a pending state for sometimes several hours. Need to understand why and if its a configuration issue

Hi I am trying to develop Apple MDM solution as a vendor. I got the Vendor certificate from apple developer portal. When I was trying to generate the csr and upload to Portal (https://identity.apple.com/pushcert/) It says Invalid Certificate Signing Request. I had also tried to follow documentation (https://developer.apple.com/documentation/devicemanagement/setting-up-push-notifications-for-your-mdm-customers) but still the same error. Can anyone please guide how to generate the csr.

Last year I used the iOS Distribution Managed Certificate (Enterprise Program) to sign an App and to distribute it internally. The Cert is still valid until May 2026. But its associated Provisiong Profile (which is not visible in the Apple Portal, but within Xcode when you export your archive) expired last week. Until then it was impossible for me to somehow force renew the profile and that lead to the fact that my app was not usable for a day, because the renewal was done after the expiration of the old one. Whats the whole point of the managed signing if can't influence the provisioning update. To be clear: I don't speak about the certificate - just about the profile. Or am I using it wrong?

As we know, we can't add restrictions payload in the mobileconfig when registing the device. We are developing MDM by ourselfs, met some trouble. Please help.

Why don't obtain equipment list (https://mdmenrollment.apple.com/server/devices) interface returns "device_family" contour information. This interface only returns some fields, and many field values are not returned

I'm writing to point out a potential structural error in an example of the DeclarativeManagement command. This could cause significant confusion for developers implementing the MDM protocol. The standard structure for a server-to-device MDM command requires CommandUUID and the Command dictionary to be siblings under the top-level dictionary. The CommandUUID serves as a top-level identifier for the entire command envelope. This is the correct, expected structure: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> </dict> </plist> This is an example of the incorrect structure I've seen: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> </dict> </plist>

Hi everyone, I’m sharing this because I’ve been stuck with this issue for over two weeks, and I still haven’t found a solution — or received a meaningful response from Apple Support. A yellow banner has appeared on my account saying: “The Apple Developer Program License Agreement has been updated and needs to be reviewed.” But here’s the problem: I’ve already accepted the latest agreement long ago. When I log into both: App Store Connect Developer Portal …there’s no new agreement to accept, no prompt, no button — absolutely nothing new. The yellow banner simply refuses to go away, and it's preventing updates. I’ve already: Cleared cache & cookies Tried Safari, Chrome, Firefox Logged in from different devices/networks Verified that I am the Account Holder Reported the issue via Apple Developer Support (more than a week ago) Despite clearly stating the urgency of the matter, I’ve received no fix and no timeline. This is beginning to feel like developers’ time — especially for those who depend on timely releases — isn’t being taken seriously. So I’m writing here to ask: 🔹 Has anyone else encountered this same issue recently? 🔹 Is there any known workaround or fix? I’d appreciate any help or shared experience. Thank you.

I encounter a connection error with Apple Configurator v2.18 when, after making changes in macOS Sequel 15.6.1, I want to apply and transfer the changes to the iPhone icon layout in iOS 26: Apple Configurator v2.18 crashes and returns an error message: ‘Try the operation again. If it fails, quit the application, launch it again, and try again. [NSCocoaErrorDomain – 0x1001 (4097)]’ I have done some research, and it seems that this bug has been identified and fixed in Apple Configurator 2 v2.19 (Build 10434). Have you encountered this problem? Do you know where to find version v2.19? This fixed version does not appear to have been released yet, and Apple support has been unable to help me. Thank you all for your help.

I have come across this Hideable attribute for managed apps, introduced in iOS 18.1, and I've encountered some behavior that seems to contradict the official documentation. According to Apple's documentation for app.managed.yaml, setting the Hideable key to false under the Attributes section should prevent a user from hiding the app. The documentation explicitly states: If false, the system prevents the user from hiding the app. It doesn't affect the user's ability to leave it in the App Library, while removing it from the Home Screen. I have configured this in my app.managed.yaml and successfully applied the profile to my test device via our MDM server. However, I am still able to hide the application from both the Home Screen and the App Library. Here are the steps I'm taking to hide the app: Long-press the app icon on Home Screen Select "Require Touch ID" Select "Hide and Require Touch ID" Authenticate using Touch ID Select "Hide App" After these steps, the app is no longer visible on the Home Screen or in the App Library, which is contrary to the behavior described in the documentation for when Hideable is set to false. My question is: Is this a known issue or a potential bug in iOS 18.1? Or, is there an additional configuration profile or a specific device supervision requirement that I might be missing to enforce this restriction correctly? Any clarification would be greatly appreciated! Thank you!

We intend to sell in india markets. In india our tax compliance is GSTIN which is also highlighted in your "Provide tax information for alternative payment options" section. We will not be making any sale outside India and hence are not liable for any tax compliance or withholding of tax outside india. Please guide us on how we should fill the tax forms.

I tried the new feature of macOS 26.0 com.apple.configuration.app.managed. A configuration and its activation are defined with the data like this. InstallBehavior: Install: Required License: Assignment: Device iOSApp: true AppStoreID: '1113153706' After distributing the configuration with DeclarativeDevicement MDM command, an error is notified via status channel app.managed.list. "managed": { "list": [ { "state": "failed", "declaration-identifier": "1424a813-113f-5de0-9a75-38bf64f22673", "identifier": "com.microsoft.skype.teams", "name": "Microsoft Teams" } ] } What am I missing in the settings? Thank you

I registered in this summer, uploaded 2 apps. But recently I decided to add iAP to my apps, everything is ready, in Xcode sandbox everything works fine, but when I uploaded new version to TestFlight to test, when I tap on the subscription it says something like "Product not found". (I have added subscriptions to the app, and added them to the version before submitting, also, this version is in status "awaiting developer release" so I can tap a button and this new version with iAPs will be on App Store. But im unsure what to do, because exactly this verified by Apple's version is not working in TestFlight.) In Business section of my Apple Developer Account in Agreements I only have agreement of free apps, but not about the paid apps. 
When I registered I used my (R)(us)sian passport, I think this is the reason that I simply don't even have the agreement of paid apps to accept it. 
I have multiple passports, and multiple EU debit cards. I emailed apple to change the location of my account (to another EU country), but they ghosted me. They sent me emails to upload documents about 4 or 5 times, every time I uploaded my another passport, got an auto email "thank you, we will write you in 2-3 days", but either they did not write me, or they said that the document is not in English (it isn't). 
What do I do? Also, to my situation, someone of my family has a company in (R)(us)sia, and I have in EU (Estonia). Maybe if nothing will work out with "Individual account", I should change to my company? And what is better EU or (R)(us)sian? 
Im new to this community, hope to hear an answer, or just an advice. Thank you!

Hey all, how long does bank account validation take typically? I have everything else in my paid agreement approved and showing active except the bank account. It says 24 hours but it has been over 3 days and there has been no progress.

During MDM Automated Device Enrollment of Apple TV, the web view defined by configuration_web_url is not working. We are using the web view to display the usage policy for all devices. While the web view functions correctly for other devices, it is resulting in an error specifically for Apple TV. Could you please clarify whether Apple plans to implement support for this feature on Apple TV in the future or if it will not be supported? Referring to configuration_web_url in: https://developer.apple.com/documentation/devicemanagement/profile