I am unable to connect Xcode Cloud to my GitHub organization repository despite being the organization owner. Error: CI.SCM.Error.RepositoryNotFound Xcode Version: 16.2 (or your version) Steps I have taken: Verified I am an Owner of the GitHub organization Uninstalled and reinstalled Xcode Cloud GitHub App multiple times Cleared all local Xcode caches and preferences Signed out of Apple ID on Mac and restarted Signed back in to Xcode only (not system level) Tried granting access again Attempted with multiple organization owner accounts Following API shows: 401 Unauthorized on https://appstoreconnect.apple.com/olympus/v1/providerSwitchRequests Additional context: GitHub App shows as successfully installed on organization Repository access set to "All repositories" Has anyone else encountered this or found a workaround? Thank you!

Dear Xcode cloud support. on 30.1.2026 Xcode cloud was not able to connect to our git server. so I deleted the repository from app store connect Xcode cloud settings and deleted the Xcode cloud in app store connect for all our apps. I started to create Xcode cloud workflow from Xcode and when I want to Grant Access - Register GitLab Application - to our git repository I get and error : "504 Client Timeout. If you are using a firewall, it must be configured to accept incoming connections." git is behind VPN but the IP address ranges 17.58.0.0/18, 17.58.192.0/18, and 57.103.0.0/22 are white labeled and before 30.1.2026 it was working. I contacted the gitlab administrators and they acknowledged that during "Register GitLab Application" they see no traffic (in gltlab and proxy server) from xcode cloud. I tried "Register GitLab Application" multiple times until now with same error. It is not app specific because this error happens for all our apps. Thanks a lot yours sincerely, Zoltan Bognar More Info: Source Control Provider: git-lab self-managed, tested with web browser: safari, chrome I can provide additional info like Primary repository, App store team ID, Entity Name, Link to repository, Application ID to grant access, and bundle id. if needed.

This happens way too often (see the image below). Especially today. I used this snippet from the offical Rust website to install rustup: curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y Run ci_post_clone.sh script Run command: 'cd /Volumes/workspace/repository/apps/app/ios/ci_scripts && /Volumes/workspace/repository/apps/app/ios/ci_scripts/ci_post_clone.sh' info: downloading installer warn: curl: (6) Could not resolve host: static.rust-lang.org curl: (6) Could not resolve host: static.rust-lang.org curl: (6) Could not resolve host: static.rust-lang.org curl: (6) Could not resolve host: static.rust-lang.org error: command failed: downloader https://static.rust-lang.org/rustup/dist/x86_64-apple-darwin/rustup-init /var/folders/6h/_32gb9js77g6c54h3q7g6q1h0000gn/T/tmp.yave38jqWa/rustup-init x86_64-apple-darwin Error: Command exited with non-zero exit-code: 1 Warning: Running ci_post_clone.sh script failed (exited with code 1). Executable scripts are run using the interpreter specified in the shebang line.

I have an app that downloads different pods, but they suddenly stopped: curl: (6) Could not resolve host: dl.google.com Warning: Problem : timeout. Will retry in 1 seconds. curl: (6) Could not resolve host: dl.google.com Warning: Problem : timeout. Will retry in 2 seconds. 1 retries left. curl: (6) Could not resolve host: dl.google.com Earlier it did not find https://cdn.cocoapods.org Temp issue or do you have to setup DNS of some sort?

I'm experiencing a persistent issue with Xcode Cloud where my iOS app (Spellboard) builds and archives successfully, but all three export steps fail with exit code 70: Export archive for ad-hoc distribution — exit code 70 Export archive for development distribution — exit code 70 Export archive for app-store distribution — exit code 70 Environment: Xcode Cloud Build 45, branch: main Project: Spellboard.xcodeproj Team: EinsteinAI Target: Any iOS Device (arm64) Automatic code signing (managed by Xcode Cloud) Building on a Remote Mac (additional code signing constraints) Error details from logs: The xcodebuild -exportArchive command fails during the signing phase. For example, the development distribution step shows: xcodebuild -exportArchive -archivePath /Volumes/workspace/tmp/ec4c2b30-ebd1-435f-8d8f-621326235df1.xcarchive -exportPath /Volumes/workspace/developmentexport -exportOptionsPlist /Volumes/workspace/ci/development-exportoptions.plist -DVTProvisioningIsManaged=YES -IDEDistributionLogDirectory=/Volumes/workspace/tmp/development-export-archive-logs -DVTSkipCertificateValidityCheck=YES -DVTServicesLogLevel=3 Command exited with non-zero exit-code: 70 The same pattern repeats for ad-hoc and app-store distribution exports. What I've verified: The build itself compiles successfully (all modules compile, command executed successfully) No code changes were made that would affect signing The workflow is configured with automatic signing managed by Xcode Cloud Post-action is set to TestFlight External Testing Additional constraint — Remote Mac: I'm building on a Remote Mac, which adds complexity to code signing and keychain access. The Remote Mac environment has known limitations with certificate and provisioning profile management compared to a local Mac. This may be a contributing factor to the export failures. This appears to be an issue with how Xcode Cloud is handling the Apple Distribution and Apple Development signing certificates during the export phase, not a build compilation issue. Has anyone encountered this recently, or is there a known issue with Xcode Cloud's managed signing on Remote Mac environments? Any guidance on resolving exit code 70 during the export step would be greatly appreciated.

Is it possible to run an xcode cloud test with arm64 simulators NOT x86? as my app doesnt work on x86.

I'm attempting to use Cloud Signing to export the Release version of 3 different apps for App Store, as described in https://developer.apple.com/videos/play/wwdc2021/10204/ The process completes successfully, and appears to be signed correctly, with a newly-created certificate in the developer portal of type "Distribution Managed". When I upload to App Store Connect however, I see the following error for several third-party Swift packages, distributed as frameworks: Validation failed (409) Invalid Signature. Code failed to satisfy specified code requirement(s). The file at path “MyApp.app/Frameworks/MyFramework.framework/MyFramework” is not properly signed. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose “Clean All” in Xcode, delete the “build” directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/support/code-signing. If I have a manually created Distribution certificate installed in the keychain at the point of export, the same archive is signed with that certificate, and is accepted by App Store Connect without issue. The xcodebuild command I am using (roughly): xcodebuild -exportArchive \ -archivePath "$ARCHIVE_PATH" \ -exportPath "$EXPORT_PATH" \ -exportOptionsPlist "$EXPORT_OPTIONS" \ -authenticationKeyPath "$API_KEY" \ -authenticationKeyID "$API_KEY_ID" \ -authenticationKeyIssuerID "$API_KEY_ISSUER" \ -allowProvisioningUpdates The plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "<http://www.apple.com/DTDs/PropertyList-1.0.dtd>"> <plist version="1.0"> <dict> <key>method</key> <string>app-store-connect</string> <key>teamID</key> <string>$TEAM</string> <key>uploadSymbols</key> <true/> <key>signingStyle</key> <string>automatic</string> </dict> </plist> Is what I’m trying to do supported? Is this a bug?

We have been using Xcode Cloud Build to test an internal app. A new build is triggered automatically by a merge to main in github. Up until a few weeks ago everything was fine, we would get a notarize button and a download link. On 1/29/2026 the process started timing out at the finalizing step. The logs in the UI show no errors just a "cancelled" flag after 8-12 hours. Clicking the logs tab shows all green up until the step you would normally expect a "stapling". Any thoughts on were to look to triage this?

Hi, our Xcode Cloud runs produce dsyms for test targets that massively increase the artifacts size, more specifically the "Test Products for" zip, that slows down the build due to the "upload artifacts" phase. These dsyms are useless, so we would like to stop producing them on Xcode Cloud builds. Consider that the workflow uses the autogenerated scheme for a package that's part of the Xcode project. How can we tell Xcode Cloud to not produce dsyms?

Hi everyone, I’m encountering an issue with Xcode Cloud when trying to notarize my macOS app. As shown in the screenshot, there are no errors in the logs, but the process gets stuck indefinitely. The message says: The post-action could not be completed because the build was canceled. No artifacts are generated at all. This problem started recently. Notarization works perfectly when I submit from my local Xcode, so it seems to be specific to Xcode Cloud. Has anyone else experienced this?

My workflow is using Xcode 16.4 and macOS Tahoe 26.2 (25C56). I am trying to change Xcode version to 26.2. When I click Save after some time I get "Something went wrong" error message without any additional details (see screenshot). I get the same error for the following cases: Tried changing a different workflow Tried to deactivate a workflow Tried various combinations of Xcode (26.1, 26.1.1, 26.2) + mac OS (26.1, 26.2) Tried creating a new workflow with Xcode 26.2 (haven't tried any other Xcode versions though)

I'm trying to upload my app build with Xcode Cloud. It builds and runs fine on the simulator, but when I try to upload to the cloud it keeps failing from Ad-hoc and Developer Distr. (Error code 70) I have tried/verified: -Verifying that my workflow archive in Xcode is set to "App Store Connect" (setting it to internal Test flight did not work either) -TestFlight Internal is set as a Post-Action and I created/added a test group -All App Store agreements signed and active -Revoking out-of-date developer certificates (Development Managed) -Running build from command line (using git pull origin main, git push origin main) Excerpts of the Error Output (ip addresses censored) Export archive for ad-hoc distribution 15.9s Run command: 'xcodebuild -exportArchive -archivePath /Volumes/workspace/tmp/3fe6638a-94b8-4944-8406-0e291469f933.xcarchive -exportPath /Volumes/workspace/adhocexport -exportOptionsPlist /Volumes/workspace/ci/ad-hoc-exportoptions.plist '-DVTPortalRequest.Endpoint=http://172.16.XX.XX:XXXX' -DVTProvisioningIsManaged=YES -IDEDistributionLogDirectory=/Volumes/workspace/tmp/ad-hoc-export-archive-logs -DVTSkipCertificateValidityCheck=YES -DVTServicesLogLevel=3' Error Command exited with non-zero exit-code: 70 Another similar error exists for development distribution

Good morning all, We have an on-premise instance of Bitbucket (v8.19.25), using a custom port. We'd like to try using Xcode Cloud, compare to our current CI/CD provider. Once I have to select my source control provider to grant access, I select Bitbucket Server. If I try to input the Host Name with, or without a port, I'm receiving this response: { "message": "An error occurred", "details": [ { "message": "An error occurred", "source": "host" } ], "actions": [], "recovery_actions": [ { "dismiss_label": "OK" }, { "feedback_label": "Provide Feedback", "feedback_component": "Xcode Cloud | New Bugs" } ], "should_show_error": true } Which, of course, doesn't help me in the slightest to understand why the connection fails. I do notice that the request to https://appstoreconnect.apple.com/ci/api/teams/<id>/setup-flow/scm-repositories in the web inspector already includes a host and port that I use to clone the repository locally. However, the web-based interface of Bitbucket doesn't include that port. So, if I clone a repo: ssh://<bitbucket-instance>:<port>, but if I look at pull requests: https://`. My colleagues have already determined that there shouldn't be any firewall rules or gateway limits, so Bitbucket should be reachable. No VPN either. How can I continue to fix this?

Xcode Cloud builds are hanging forever at the final step, Prepare Build for App Store Connect. This is a common issue that requires some fix in Cupertino. Reporting this in the afternoon of Jan 13, Pacific Time.

After pushing to a branch which is automatically configured to build and distribute on TestFlight, I found no way to log on and check Xcode cloud builds and nothing being pushed to that branch was building or showing up elsewhere in App Store Connect.

Just learnt today that personal development teams do not support the Push Notifications and iCloud capabilities, is there any workaround besides pay another 99 for an enterprise development account? Thanks in advance.

I’m trying to integrate our app with the iXGuard obfuscation tool, which needs to run in the archive post-actions step in Xcode Cloud. The issue is: iXGuard takes a long time to complete and, during its execution, does not generate any console output or logs in the Archive Post-actions step. Problem: When Archive Post-actions runs for a long time without producing log output, Xcode Cloud triggers a timeout and the workflow stops before running the next CI step (e.g., ci_post_xcodebuild.sh). Even though the script continues running in the background, the workflow is aborted due to inactivity in the logs. Workaround Tried: As a workaround, I have ci_post_xcodebuild.sh print the logs generated by archive post-actions. However, this does not help in my case since the timeout occurs before ci_post_xcodebuild.sh even runs. Error: The step invocation hit a user timeout. The xcodebuild archive invocation timed out. No activity has been detected on stdout, stderr or the result bundle in 30 minutes. Question: Is there a recommended way to prevent Xcode Cloud from timing out during long-running steps that do not produce log output? Are there best practices for keeping the workflow alive with periodic logs during Archive Post-actions? Any support or workaround for integrating tools like iXGuard that require significant processing time after the archive step? Thanks in advance for your help!

Hello guys, recently I integrated a third-party library into my code to handle blur effects (Glur). This library leverages Metal's compute capabilities and appears to automatically depend on the Metal toolchain during the build process. When using Xcode Cloud, the archive step consistently fails with a "CompileMetalFile Failed" error. However, when I manually archive the project in Xcode locally, everything works fine without any issues. I’ve confirmed that the macOS and Xcode versions specified in my Xcode Cloud workflow are correct. Reply if you know how to fix it or it will be fixed future, thanks. I'm using Xcode 26.2(17C52) and macOS(15.7.1 (24G231))

Since Dec 18th, my Xcode Cloud builds (for multiple apps) have been failing with this error: Command line name "app-store" is deprecated. Use "app-store-connect" instead. I haven't made any changes to my system, signing, etc, and two separate apps started failing at the same time. No matter what I change on my Workflows (environment, new workflow from scratch, etc), nothing seems to fix it, which leads me to believe this is a bug with Xcode Cloud itself. I've logged FB21456291 already, but just wanted to post here to see if I'm missing something.

As mentioned in the linked post, I can archive the project locally but not via Xcode Cloud. I have also created a new project, but the same thing happens here. https://developer.apple.com/forums/thread/746210 Error Code: ITMS-90035: Invalid Signature. Code failed to satisfy specified code requirement(s). The file at path “{AppName}.app/{AppName}” is not properly signed. Make sure you have signed your application with a distribution certificate, not an ad hoc certificate or a development certificate. Verify that the code signing settings in Xcode are correct at the target level (which override any values at the project level). Additionally, make sure the bundle you are uploading was built using a Release target in Xcode, not a Simulator target. If you are certain your code signing settings are correct, choose “Clean All” in Xcode, delete the “build” directory in the Finder, and rebuild your release target. For more information, please consult https://developer.apple.com/support/code-signing.