Hi, when creating a CryptoTokenKit extension according to https://developer.apple.com/documentation/cryptotokenkit/authenticating-users-with-a-cryptographic-token, it is neccessary to register it under the securityagent in order to make the CTK usable before login. i.e. we want to run sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp However, even with the empty application the command fails with illegal hardware instruction sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp I see that it always crashes when the HostApp is sandboxed, but it does not work even without sandboxing (i am sharing the error report message below). i actually noticed that when the HostApp is sandboxed and I run the above command, the extension starts to be usable even before login, even though i see the HostApp crash. The same does not happen without the sandbox So I am curious how to in fact properly register the CTK extension under security agent? Also am not sure how to unregister it from the _securityagent thank you for your help Version: 1.0 (1) Code Type: X86-64 (Native) Parent Process: Exited process [9395] Responsible: Terminal [399] User ID: 92 Date/Time: 2025-03-21 18:54:03.0684 +0100 OS Version: macOS 15.3.2 (24D81) Report Version: 12 Bridge OS Version: 9.3 (22P3060) Anonymous UUID: 41F9918C-5BCA-01C7-59C2-3E8CFC3F8653 Sleep/Wake UUID: 8AB66C75-3C32-41D4-9BD4-887B0FB468FE Time Awake Since Boot: 4300 seconds Time Since Wake: 1369 seconds System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: WMClientWindowManager Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 4 Illegal instruction: 4 Terminating Process: exc handler [9396] Application Specific Signatures: API Misuse Thread 0 Crashed:: Dispatch queue: WMClientWindowManager 0 libxpc.dylib 0x7ff80667b2bd _xpc_api_misuse + 113 1 libxpc.dylib 0x7ff80665f0e4 xpc_connection_set_target_uid + 187 2 WindowManagement 0x7ffd0b946693 -[WMClientWindowManager _createXPCConnection] + 1011 3 WindowManagement 0x7ffd0b947361 -[WMClientWindowManager _xpcConnection] + 65 4 WindowManagement 0x7ffd0b9447c9 __31-[WMClientWindowManager stages]_block_invoke + 41 5 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 6 libdispatch.dylib 0x7ff8067bca2c _dispatch_lane_barrier_sync_invoke_and_complete + 60 7 WindowManagement 0x7ffd0b9446fc -[WMClientWindowManager stages] + 268 8 AppKit 0x7ff80b1fd0b7 __54-[NSWMWindowCoordinator initializeStageFramesIfNeeded]_block_invoke + 30 9 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 10 libdispatch.dylib 0x7ff8067b0aa2 _dispatch_once_callout + 20 11 AppKit 0x7ff80b1fd060 -[NSWMWindowCoordinator initializeStageFramesIfNeeded] + 296 12 AppKit 0x7ff80a3b3701 -[NSWindow _commonInitFrame:styleMask:backing:defer:] + 888 13 AppKit 0x7ff80a3b2f77 -[NSWindow _initContent:styleMask:backing:defer:contentView:] + 1222 14 AppKit 0x7ff80a3b2aa9 -[NSWindow initWithContentRect:styleMask:backing:defer:] + 42 15 SwiftUI 0x7ff917f321e0 0x7ff91776f000 + 8139232 16 SwiftUI 0x7ff917a8e2f2 0x7ff91776f000 + 3273458 17 SwiftUI 0x7ff917bccfba 0x7ff91776f000 + 4579258 18 SwiftUI 0x7ff917f2ca8e 0x7ff91776f000 + 8116878 19 SwiftUI 0x7ff917f24a65 0x7ff91776f000 + 8084069 20 SwiftUI 0x7ff917f21540 0x7ff91776f000 + 8070464 21 SwiftUI 0x7ff91849e9f1 0x7ff91776f000 + 13826545 22 SwiftUICore 0x7ffb13103ea5 0x7ffb12c81000 + 4730533 23 SwiftUICore 0x7ffb13102e0f 0x7ffb12c81000 + 4726287 24 SwiftUI 0x7ff91849e903 0x7ff91776f000 + 13826307 25 SwiftUI 0x7ff91849bc1c 0x7ff91776f000 + 13814812 26 AppKit 0x7ff80a54f191 -[NSApplication _doOpenUntitled] + 422 27 AppKit 0x7ff80a4efc59 __58-[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:]_block_invoke + 237 28 AppKit 0x7ff80a963818 __102-[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:]_block_invoke + 101 29 AppKit 0x7ff80a4ef6fa __97-[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:]_block_invoke_3 + 148 30 AppKit 0x7ff80a4eee8f -[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:] + 635 31 AppKit 0x7ff80a96373d -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:] + 269 32 AppKit 0x7ff80a3a6259 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 529 33 AppKit 0x7ff80a3a5eb9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 679 34 Foundation 0x7ff807a4b471 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 307 35 Foundation 0x7ff807a4b285 _NSAppleEventManagerGenericHandler + 80 36 AE 0x7ff80e0e4e95 0x7ff80e0da000 + 44693 37 AE 0x7ff80e0e4723 0x7ff80e0da000 + 42787 38 AE 0x7ff80e0de028 aeProcessAppleEvent + 409 39 HIToolbox 0x7ff81217b836 AEProcessAppleEvent + 55 40 AppKit 0x7ff80a39ee6a _DPSNextEvent + 1725 41 AppKit 0x7ff80adf38b8 -[NSApplication(NSEventRouting) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 1290 42 AppKit 0x7ff80a38faa9 -[NSApplication run] + 610 43 AppKit 0x7ff80a362d34 NSApplicationMain + 823 44 SwiftUI 0x7ff9177a7da1 0x7ff91776f000 + 232865 45 SwiftUI 0x7ff917af0d40 0x7ff91776f000 + 3677504 46 SwiftUI 0x7ff917d8fef8 0x7ff91776f000 + 6426360 47 Crescendo CryptoTokenKit 0x10b1baf6e static HostApp.$main() + 30 48 Crescendo CryptoTokenKit 0x10b1bd2f9 main + 9 (HostApp.swift:24) 49 dyld 0x7ff8065c82cd start + 1805

We are facing an issue with Keychain sharing across our apps after our Team ID was updated. Below are the steps we have already tried and the current observations: Steps we have performed so far: After our Team ID changed, we opened and re-saved all the provisioning profiles. We created a Keychain Access Group: xxxx.net.soti.mobicontrol (net.soti.mobicontrol is one bundle id of one of the app) and added it to the entitlements of all related apps. We are saving and reading certificates using this access group only. Below is a sample code snippet we are using for the query: [genericPasswordQuery setObject:(id)kSecClassGenericPassword forKey:(id)kSecClass]; [genericPasswordQuery setObject:identifier forKey:(id)kSecAttrGeneric]; [genericPasswordQuery setObject:accessGroup forKey:(id)kSecAttrAccessGroup]; [genericPasswordQuery setObject:(id)kSecMatchLimitOne forKey:(id)kSecMatchLimit]; [genericPasswordQuery setObject:(id)kCFBooleanTrue forKey:(id)kSecReturnAttributes]; Issues we are facing: Keychain items are not being shared consistently across apps. We receive different errors at different times: Sometimes errSecDuplicateItem (-25299), even when there is no item in the Keychain. Sometimes it works in a debug build but fails in Ad Hoc / TestFlight builds. The behavior is inconsistent and unpredictable. Expectation / Clarification Needed from Apple: Are we missing any additional configuration steps after the Team ID update? Is there a known issue with Keychain Access Groups not working correctly in certain build types (Debug vs AdHoc/TestFlight)? Guidance on why we are intermittently getting -25299 and how to properly reset/re-add items in the Keychain. Any additional entitlement / provisioning profile configuration that we should double-check. Request you to please raise a support ticket with Apple Developer Technical Support including the above details, so that we can get guidance on the correct setup and resolve this issue.

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

Attempting to DECRYPT a cipher message using the Apple API SecKeyCreateDecryptedData(privateKey, .rsaEncryptionOAEPSHA256, encryptedMessage). Decryption ALWAYS fails for every algorithm. SecKeyCreateDecryptedDataWithParameters Error: `Domain=NSOSStatusErrorDomain Code=-50 "algid:encrypt:RSA:OAEP:SHA256: algorithm not supported by the key <SecKeyRef:('com.yubico.Authenticator.TokenExtension:5621CDF8560D4C412030886584EC4C9E394CC376DD9738B0CCBB51924FC26EB6') 0x3007fd150>" UserInfo={numberOfErrorsDeep=0, NSDescription=algid:encrypt:RSA:OAEP:SHA256: algorithm not supported by the key <SecKeyRef:('com.yubico.Authenticator.TokenExtension:5621CDF8560D4C412030886584EC4C9E394CC376DD9738B0CCBB51924FC26EB6') 0x3007fd150>}` Decryption failed: SecKeyCreateDecryptedData returned nil. Error: One or more parameters passed to a function were not valid. When checking with SecKeyIsAlgorithmSupported(privateKey, .decrypt, <ANYalgorithm>) all algorithms fail. Btw - The privateKey does support decryption when retrieving the attributes. Important to know: The private key is a reference to an external private key placed in the iOS Keychain via a 3rd party CryptoTokenKit Extension app. When I perform, the SecKeyCreateSignature(...) and pass in the SAME privateKey reference, the OS automatically calls the 3rd party app to perform a successful signing with the private key that reside on a YubiKey. Here's my code for obtaining the private key reference from an Identity: func getKeyPairFromIdentity() -> (privateKey: SecKey, publicKey: SecKey)? { let query = NSDictionary( dictionary: [ kSecClass as String: kSecClassIdentity, kSecAttrTokenID as String: self.tokenID!, kSecReturnRef as String: kCFBooleanTrue as Any ] ) var identityRef: CFTypeRef? let status = SecItemCopyMatching(query, &identityRef) if status == errSecSuccess, let identity = identityRef { var privateKeyRef: SecKey? let keyStatus = SecIdentityCopyPrivateKey(identity as! SecIdentity, &privateKeyRef) if keyStatus == errSecSuccess, let privateKey = privateKeyRef { let publicKey = SecKeyCopyPublicKey(privateKey) if let publicKey = publicKey { print("Private and public keys extracted successfully.") return (privateKey, publicKey) } else { print("Failed to extract public key from private key.") return nil } } else { print("SecIdentityCopyPrivateKey: Private key not found error: \(keyStatus)") return nil } } else { print("SecIdentity not found or error: \(status)") return nil } }

Hi, my app is receiving all keyboard events through Input Monitoring preference. It completely stopped to work on macOS 15 Sequoia and I have no idea why. Where can I read what has been changed in Input Monitoring? Thanks!

Our app uses Face ID to optionally secure access to the app for device owner. This not the new 'Require Face ID' feature of iOS 18 - this is our own custom implementation that has some other related logic for authentication handling. Starting in iOS 18.3.1, starting the app results in multiple Face Id checks being fired - sometimes just a couple but sometimes many more. Curiously, this is happening even when I completely disable any code we have that prompts for Face ID. It appears to come from nowhere. This does not happen on prior iOS 18 releases so, while I might be doing something improper in the code, something specific has changed in iOS 18.3.1 to cause this issue to manifest. I'm looking for advice as to what could be occurring here, how to debug a Face Id check that appears to come from nowhere, and what, if any, workarounds exist.

Trying to validate external reference identifiers with SecTrustEvaluateWithError Method by setting reference Ids to SecPolicyCreateSSL() & SecPolicyCreateWithProperties() But two concerns are - Validates for correct reference IDs but gives error for combination of wrong & correct reference Ids 398 days validity works mandatorily before reference Ids check. Is there any other to validate external reference Ids?, which give flexibility To pass multiple combinations of reference IDs string (wrong, correct, IP, DNS) To validate reference ID without days validity of 398. Please suggest. Any help here is highly appreciated.

In my app, I use SecItem to store some data in the Keychain. I’d like to know — when a user sets up a new iPhone and transfers data from the old device, will those Keychain items be migrated or synced to the new device?

Hi! We are developing an authentication plugin for macOS that integrates with the system's authentication flow. The plugin is designed to prompt the user for approval via a push notification in our app before allowing access. The plugin is added as the first mechanism in the authenticate rule, followed by the default builtin:authenticate as a fallback. When the system requests authentication (e.g., during screen unlock), our plugin successfully displays the custom UI and sends a push notification to the user's device. However, I've encountered the following issue: If the user does not approve the push notification within ~30 seconds, the system resets the screen lock (expected behavior). If the user approves the push notification within approximately 30 seconds but doesn’t start entering their password before the timeout expires, the system still resets the screen lock before they can enter their password, effectively canceling the session. What I've Tried: Attempted to imitate mouse movement after the push button was clicked to keep the session active. Created a display sleep prevention assertion using IOKit to prevent the screen from turning off. Used the caffeinate command to keep the display and system awake. Tried setting the result as allow for the authorization request and passing an empty password to prevent the display from turning off. I also checked the system logs when this issue occurred and found the following messages: ___loginwindow: -[LWScreenLock (Private) askForPasswordSecAgent] | localUser = >timeout loginwindow: -[LWScreenLock handleUnlockResult:] _block_invoke | ERROR: Unexpected _lockRequestedBy of:7 sleeping screen loginwindow: SleepDisplay | enter powerd: Process (loginwindow) is requesting display idle___ These messages suggest that the loginwindow process encounters a timeout condition, followed by the display entering sleep mode. Despite my attempts to prevent this behavior, the screen lock still resets prematurely. Questions: Is there a documented (or undocumented) system timeout for the entire authentication flow during screen unlock that I cannot override? Are there any strategies for pausing or extending the authentication timeout to allow for complex authentication flows like push notifications? Any guidance or insights would be greatly appreciated. Thank you!

Our Goal: We are implementing a workflow for derived credentials. Our objective is to have a PIV/CAC derived credential (from Entrust), installed via the Intune MDM Company Portal app, and then use it within our (managed) app to generate digital signatures. Challenge: The Intune Company Portal installs these identities into the System Keychain. Because third-party apps are restricted from accessing private keys in the System Keychain, we are running into a roadblock. Our Question: 1) Is there an API that allows us to create a signature without us having to pass the private key itself, but instead just pass a handle/some reference to the private key and then the API can access the private key in the system keychain and create the signature under the hood. SecKeyCreateSignature is the API method that creates a signature but requires passing a private key. 2) If #1 is not feasible, is there a way to get access to system keychain to retrieve certs + private key for managed apps

Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

In iOS 18, i use CNContactPickerViewController to access to Contacts (i know it is one-time access). After first pick up one contact, the Setting > Apps > my app > Contacts shows Private Access without any option to close it. Is there any way to close it and undisplay it ? I tried to uninstall and reinstall my app, but it didn't work.

Has anyone here encountered this? It's driving me crazy. It appears on launch. App Sandbox is enabled. The proper entitlement is selected (com.apple.security.files.user-selected.read-write) I believe this is causing an issue with app functionality for users on different machines. There is zero documentation across the internet on this problem. I am on macOS 26 beta. This error appears in both Xcode and Xcode-beta. Please help! Thank you, Logan

Hi Apple Team and Community, We encountered a sudden and widespread failure related to the App Attest service on Friday, July 25, starting at around 9:22 AM UTC. After an extended investigation, our network engineers noted that the size of the attestation objects received from the attestKey call grew in size notably starting at that time. As a result, our firewall began blocking the requests from our app made to our servers with the Base64-encoded attestation objects in the payload, as these requests began triggering our firewall's max request length rule. Could Apple engineers please confirm whether there was any change rolled out by Apple at or around that time that would cause the attestation object size to increase? Can anyone else confirm seeing this? Any insights from Apple or others would be appreciated to ensure continued stability. Thanks!

I recently turned on the enhanced security options for my macOS app in Xcode 26.0.1 by adding the Enhanced Security capability in the Signing and Capabilities tab. Then, Xcode adds the following key-value sets (with some other key-values) to my app's entitlements file. <key>com.apple.security.hardened-process.enhanced-security-version</key> <integer>1</integer> <key>com.apple.security.hardened-process.platform-restrictions</key> <integer>2</integer> These values appear following the documentation about the enhanced security feature (Enabling enhanced security for your app) and the app works without any issues. However, when I submitted a new version to the Mac App Store, my submission was rejected, and I received the following message from the App Review team via the App Store Connect. Guideline 2.4.5(i) - Performance Your app incorrectly implements sandboxing, or it contains one or more entitlements with invalid values. Please review the included entitlements and sandboxing documentation and resolve this issue before resubmitting a new binary. Entitlement "com.apple.security.hardened-process.enhanced-security-version" value must be boolean and true. Entitlement "com.apple.security.hardened-process.platform-restrictions" value must be boolean and true. When I changed those values directly in the entitlements file based on this message, the app appears to still work. However, these settings are against the description in the documentation I mentioned above and against the settings Xcode inserted after changing the GUI setting view. So, my question is, which settings are actually correct to enable the Enhanced Security and the Additional Runtime Platform Restrictions?

Hi, I'm working on developing my own CryptoTokenKit (CTK) extension to enable codesign with HSM-backed keys. Here's what I’ve done so far: The container app sets up the tokenConfiguration with TKTokenKeychainCertificate and TKTokenKeychainKey. The extension registers successfully and is visible via pluginkit when launching the container app. The virtual smartcard appears when running security list-smartcards. The certificate, key, and identity are all visible using security export-smartcard -i [card]. However, nothing appears in the Keychain. After adding logging and reviewing output in the Console, I’ve observed the following behavior when running codesign: My TKTokenSession is instantiated correctly, using my custom TKToken implementation — so far, so good. However, none of the following TKTokenSession methods are ever called: func tokenSession(_ session: TKTokenSession, beginAuthFor operation: TKTokenOperation, constraint: Any) throws -> TKTokenAuthOperation func tokenSession(_ session: TKTokenSession, supports operation: TKTokenOperation, keyObjectID: TKToken.ObjectID, algorithm: TKTokenKeyAlgorithm) -> Bool func tokenSession(_ session: TKTokenSession, sign dataToSign: Data, keyObjectID: Any, algorithm: TKTokenKeyAlgorithm) throws -> Data func tokenSession(_ session: TKTokenSession, decrypt ciphertext: Data, keyObjectID: Any, algorithm: TKTokenKeyAlgorithm) throws -> Data func tokenSession(_ session: TKTokenSession, performKeyExchange otherPartyPublicKeyData: Data, keyObjectID objectID: Any, algorithm: TKTokenKeyAlgorithm, parameters: TKTokenKeyExchangeParameters) throws -> Data The only relevant Console log is: default 11:31:15.453969+0200 PersistentToken [0x154d04850] invalidated because the client process (pid 4899) either cancelled the connection or exited There’s no crash report related to the extension, so my assumption is that ctkd is closing the connection for some unknown reason. Is there any way to debug this further? Thank you for your help.

Can you please give me a hand with importing certificates under MacOS? I want to connect to Wi-Fi with 802.1X authentication (EAP-TLS) using a certificate that my homebrew application imported into my data protection keychain, but the imported certificate does not show up and I cannot select the certificate. It also does not show up in the Keychain Access app. One method I have tried is to import it into the data protection keychain by using the SecItemAdd function and setting kSecUseDataProtectionKeychain to true, but it does not work. Is there a better way to do this? ID: for id in identities { let identityParams: [String: Any] = [ kSecValueRef as String: id, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addIdentityStatus = SecItemAdd(identityParams as CFDictionary, nil) if addIdentityStatus == errSecSuccess { print("Successfully added the ID.: \(addIdentityStatus)") } else { print("Failed to add the ID.: \(addIdentityStatus)") } } Certificate: for cert in certificates { let certParams: [String: Any] = [ kSecValueRef as String: cert, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addCertStatus = SecItemAdd(certParams as CFDictionary, nil) if addCertStatus == errSecSuccess { print("Successfully added the certificate.: (\(addCertStatus))") } else { print("Failed to add the certificate.: (\(addCertStatus))") } } Private key: for privateKey in keys { let keyTag = UUID().uuidString.data(using: .utf8)! let keyParams: [String: Any] = [ kSecAttrApplicationTag as String: keyTag, kSecValueRef as String: privateKey, kSecReturnPersistentRef as String: true, kSecUseDataProtectionKeychain as String: true ] let addKeyStatus = SecItemAdd(keyParams as CFDictionary, nil) if addKeyStatus == errSecSuccess { print("Successfully added the private key.: \(addKeyStatus)") } else { print("Failed to add the private key.: \(addKeyStatus)") } }

To use passkeys, you need to place the correct AASA file on the web server and add an entry in the Entitlements.plist, for example webcredentials:mydomain.com. This is clear so far, but I would like to ask if it's possible to set this webcredentials in a different way in the app? The reason for this is that we are developing a native app and our on-premise customers have their own web servers. We cannot know these domains in advance so creating a dedicated app for each customer is not option for us. Thank you for your help!

Hello, I’m storing some values in the Keychain with the attribute ‘ksecattraccessibleafterfirstunlockthisdeviceonly’ (https://developer.apple.com/documentation/security/ksecattraccessibleafterfirstunlockthisdeviceonly). When I migrate user data between iPhones via iCloud, this behaves as expected and the keys are not preserved. However, when I migrate using a direct connection between two devices, the keys are preserved, which seems to contradict the attribute’s intent. Is this a known behavior, and if so, is there a workaround?

I'm writing an app on macOS that stores passwords in the Keychain and later retrieves them using SecItemCopyMatching(). This works fine 90% of the time. However, occasionally, the call to SecItemCopyMatching() fails with errSecAuthFailed (-25293). When this occurs, simply restarting the app resolves the issue; otherwise, it will consistently fail with errSecAuthFailed. What I suspect is that the Keychain access permission has a time limitation for a process. This issue always seems to arise when I keep my app running for an extended period.